Page 1 of 2
ADF not working correctly
Posted: Tue Aug 14, 2018 7:20 am
by vfrblues
I can't get the ADF unit to work correctly. When I start the OC4BA4 server, it looks OK: the active- and standby values on the OC display units are initiated correctly (284.0 and 330.0). But as soon as I turn the encoder CW, the standby value jumps to 000.1 and isn't synchronised with the PMDG. Turning the encoder CCW, the standby value jumps to 1560.0 (!). Any suggestions?
Re: ADF not working correctly
Posted: Tue Aug 14, 2018 12:14 pm
by mvr1918
DO you have the Opencockpits built module or a own built module?
Have you enabled the DataBroadCast setting? ( see OC4BAv4 doc)
Re: ADF not working correctly
Posted: Tue Aug 14, 2018 2:47 pm
by vfrblues
I have the OpenCockpits ADF unit, and the databroadcast is enbled. The OpenCockpits units COM (2x), ATC and NAV (2x) units work perfect.
Re: ADF not working correctly
Posted: Tue Aug 14, 2018 4:40 pm
by mvr1918
Test the ADF module in SIOC/SIOCMonitor and check which numbers are used when you rotate the rotaries.
What are the numbers?
Re: ADF not working correctly
Posted: Tue Aug 14, 2018 8:32 pm
by vfrblues
0/1 outer wheel, 4/5 inner wheel.
Re: ADF not working correctly
Posted: Wed Aug 15, 2018 9:15 am
by mvr1918
Inputs numbers are correct.
What is state of the airplane ( Short,Long, Default) ?
Are the other buttons working? Can you switch displays with TRF button?
What is the text in the PMDG B737.ini file in SIOC folder?
Re: ADF not working correctly
Posted: Wed Aug 15, 2018 11:04 am
by vfrblues
Sorry, but I don't understand what you mean with the state of the airplane!?
The switches work, although the standby display doesn't change-over in the PMDG pedestal (it does change on the OC ADF module).
PMDG B737.ini:
[SIOC]
IOCP_port=8092
IOCP_timeout=4000
Minimized=Yes
toggle_delay=20
[IOCARDS MODULE]
IOCard_disable=No
IOCard_LPT=No
[FSUIPC MODULE]
FSUipcdisable=No
FSUipcRefresh=60
[IOCP CLIENTS MODULES]
IOCPini_delay=3000
IOCPclient0_disable=no
IOCPclient0_host=localhost
IOCPclient0_port=8099
IOCPclient1_disable=yes
IOCPclient1_host=localhost
IOCPclient1_port=8092
[SOUND MODULE]
Sound_disable=Yes
Volume=100
[*]
[PMDG B737]
CONFIG_FILE=OCP4NGX_v4.6.ssi
MASTER=10,10,1,103
MASTER=7,7,1,86
MASTER=15,15,1,121
MASTER=11,11,1,105
MASTER=18,8,1,98
MASTER=8,8,1,95
MASTER=9,9,1,100
MASTER=19,9,1,97
Re: ADF not working correctly
Posted: Wed Aug 15, 2018 6:22 pm
by mvr1918
The switches work, although the standby display doesn't change-over in the PMDG pedestal (it does change on the OC ADF module).
If the only issue you have is that the PMDG ADF StandBy display does not sync with the OC module's StandBy display, you have to live with that.
The PMDG SDK nor P3D's SimConnect do not support the StandBy display to be sent to any client software.
But you really do not have it to sync for a proper function.
Re: ADF not working correctly
Posted: Wed Aug 15, 2018 8:38 pm
by vfrblues
Because no one else has mentioned this non-syncing issue with the standby value of the ADF, it feels like it is something isn't right in my configuration. The other issue is still that as soon as I rotate the encoder the first time, the standby display jumps from 330.0 to a very strange number as mentioned. I don't expect that to be the normal behavior!?
Re: ADF not working correctly
Posted: Wed Aug 15, 2018 9:19 pm
by mvr1918
the standby display jumps from 330.0 to a very strange number as mentioned. I don't expect that to be the normal behavior!?
You should not get any strage numbers, so somesting is going on with you hardware that is not correct.
I suggest you try another USB connection. If that doesn't help. Log into IOCPConsole and trace what is really happening. If you find something strange send the log to
roarkrsp@gmail.com