www.flightsim4fun.com - rksoftware

Hello, I already have SIOC installed on my C:\ drive which uses your program (OCP4NGX_v4.5.ssi) for FSX. Can I use the same SIOC installation/folder for my X-Plane 11 SIOC installation, and does it therefore follow that I don't have to install SIOC for a second time?

One other question - would it be okay to have C:\XP11 and C:\SIOC or do they have to be under one main folder?

One last question - when it asks for your X-Plane folder do you point it to the main X-Plane folder (C:\XP11) or to the C:\XP11\Resources\plugins folder? Sorry for all the questions, I have your program working brilliantly for FSX but I am struggling with XP. Thanks in advance.

You only need ONE SIOC installed.
XP11 and SIOC folder locations are not dependent of each other
XPlane main folder is C:\XP11 in your case

Thanks for your quick reply! I am away for a few days, will try it as soon as I get back.

I have followed the instructions and my Com radio and Nav1 and Nav2 radios work perfectly. My Opencockpits MCP, EFIS, ADF and Transponder do not work..... when I look under SIOC monitor none of these devices are linked, but the Com and Nav radios are all linked. Any ideas please?

Send an image of the SIOC Device window and the text in XPLANE.ini

Also confirm that you do not use SIOC v6, but SIOC v5.

I am using SIOC 5.1B2 and not V6. Please see attached pictures, thanks for your help.

I've just corrected the EFIS line in XPLANE.ini to read 7,7,1,693.........EFIS is now working! Just the MCP, ADF and Transponder not working.

Switch the last numbers 794 and 782


MASTER=10 is ADF
MASTER=11 is ATC

I think there is a misprint in the doc

ADF works only for IXEG, not for Zibo