MUST READ file updated
Posted: Thu Jan 28, 2016 1:57 pm
The MUST READ file for AIRBUS has some small snags.
1. No need to add in any new entry in OC4BA.ini
2. The [AIRCRAFT] section has been replaced by a [COCKPIT] section.
3. Select AEROSOFT AIRBUS when you configure your SIOC.ini file
******************************************************************************************************************************************************
Here is an updated text for the AIRBUS MUST READ file:
OCP4ABX Driver Information v 1.1 date: 21012016
The OCP4ABX is a software driver that interfaces Opencockpits Plug&Play modules
so you can control your Aerosoft Airbus A318/A319/A320/A321 with your existing B737 hardware modules in FSX/FSX-SE/PD3.
!!!! YOU MUST HAVE a PAID VERSION of FSUIPC and OC4BA v3 ALREADY INSTALLED, TO BE ABLE TO USE THIS DRIVER. !!!!
How to install:
1) Unzip driver file OCP4ABX.exe, document files and script file OCP4ABX_v1.1.ssi to SIOC folder
2) Unzip the 3 lua files to MODULES folder in your FSX/FSX-SE/P3D main folder.
Go to FSX/FSX-SE/P3D/MODULES folder and open FSUIPC.ini file
paste in the text:
---from the line below this line--
[Auto.Airbus x]
1=lua ocp4abx_m_v1.1
2=lua ocp4abx_mc_v1.1
3=lua ocp4abx_e_v1.1
[Profile.Airbus x]
1=Airbus A3
-- including the line above this line--
Also chech that you have the line
ShortAircraftNameOk=Substring
3) Save FSUIPC.ini
How to configure:
1) Open OC4BA v3 from SIOC folder
2) Go to OC4BAConfig by clciking the Tool symbol
- Select AEROSOFT AIRBUS as Cockpit, then select ocp4abx_v1.1 as script
- the P&P MCP, EFIS, FMC should pop up ( if these are the modules you have)
Action listed under How to install and How to configure needs only to be done ONCE
How to fly
1)Start FSX/FSX-SE/P3D
2)Select an Airbus to fly
3)Open OC4BA v3 from Add-on meny and Select Airbus image and click Airbus cockpit to enter the cockpit
When you are tired of flying a computer select a PMDG aircraft,
first leave Airbus cockpit by mouse click in Airbus cockpit window in OC4BA v3
select your PMDG aircraft in FSX/FSX-SE/P3D
then select your PMDG aircraft by clicking its image in OC4BA v3 and then click in the cockpit window
Doc revision 21012016
1. No need to add in any new entry in OC4BA.ini
2. The [AIRCRAFT] section has been replaced by a [COCKPIT] section.
3. Select AEROSOFT AIRBUS when you configure your SIOC.ini file
******************************************************************************************************************************************************
Here is an updated text for the AIRBUS MUST READ file:
OCP4ABX Driver Information v 1.1 date: 21012016
The OCP4ABX is a software driver that interfaces Opencockpits Plug&Play modules
so you can control your Aerosoft Airbus A318/A319/A320/A321 with your existing B737 hardware modules in FSX/FSX-SE/PD3.
!!!! YOU MUST HAVE a PAID VERSION of FSUIPC and OC4BA v3 ALREADY INSTALLED, TO BE ABLE TO USE THIS DRIVER. !!!!
How to install:
1) Unzip driver file OCP4ABX.exe, document files and script file OCP4ABX_v1.1.ssi to SIOC folder
2) Unzip the 3 lua files to MODULES folder in your FSX/FSX-SE/P3D main folder.
Go to FSX/FSX-SE/P3D/MODULES folder and open FSUIPC.ini file
paste in the text:
---from the line below this line--
[Auto.Airbus x]
1=lua ocp4abx_m_v1.1
2=lua ocp4abx_mc_v1.1
3=lua ocp4abx_e_v1.1
[Profile.Airbus x]
1=Airbus A3
-- including the line above this line--
Also chech that you have the line
ShortAircraftNameOk=Substring
3) Save FSUIPC.ini
How to configure:
1) Open OC4BA v3 from SIOC folder
2) Go to OC4BAConfig by clciking the Tool symbol
- Select AEROSOFT AIRBUS as Cockpit, then select ocp4abx_v1.1 as script
- the P&P MCP, EFIS, FMC should pop up ( if these are the modules you have)
Action listed under How to install and How to configure needs only to be done ONCE
How to fly
1)Start FSX/FSX-SE/P3D
2)Select an Airbus to fly
3)Open OC4BA v3 from Add-on meny and Select Airbus image and click Airbus cockpit to enter the cockpit
When you are tired of flying a computer select a PMDG aircraft,
first leave Airbus cockpit by mouse click in Airbus cockpit window in OC4BA v3
select your PMDG aircraft in FSX/FSX-SE/P3D
then select your PMDG aircraft by clicking its image in OC4BA v3 and then click in the cockpit window
Doc revision 21012016