The MUST READ file for AIRBUS has some small snags.
1. No need to add in any new entry in OC4BA.ini
2. The [AIRCRAFT] section has been replaced by a [COCKPIT] section.
3. Select AEROSOFT AIRBUS when you configure your SIOC.ini file
******************************************************************************************************************************************************
Here is an updated text for the AIRBUS MUST READ file:
OCP4ABX Driver Information v 1.1 date: 21012016
The OCP4ABX is a software driver that interfaces Opencockpits Plug&Play modules
so you can control your Aerosoft Airbus A318/A319/A320/A321 with your existing B737 hardware modules in FSX/FSX-SE/PD3.
!!!! YOU MUST HAVE a PAID VERSION of FSUIPC and OC4BA v3 ALREADY INSTALLED, TO BE ABLE TO USE THIS DRIVER. !!!!
How to install:
1) Unzip driver file OCP4ABX.exe, document files and script file OCP4ABX_v1.1.ssi to SIOC folder
2) Unzip the 3 lua files to MODULES folder in your FSX/FSX-SE/P3D main folder.
Go to FSX/FSX-SE/P3D/MODULES folder and open FSUIPC.ini file
paste in the text:
---from the line below this line--
[Auto.Airbus x]
1=lua ocp4abx_m_v1.1
2=lua ocp4abx_mc_v1.1
3=lua ocp4abx_e_v1.1
[Profile.Airbus x]
1=Airbus A3
-- including the line above this line--
Also chech that you have the line
ShortAircraftNameOk=Substring
3) Save FSUIPC.ini
How to configure:
1) Open OC4BA v3 from SIOC folder
2) Go to OC4BAConfig by clciking the Tool symbol
- Select AEROSOFT AIRBUS as Cockpit, then select ocp4abx_v1.1 as script
- the P&P MCP, EFIS, FMC should pop up ( if these are the modules you have)
Action listed under How to install and How to configure needs only to be done ONCE
How to fly
1)Start FSX/FSX-SE/P3D
2)Select an Airbus to fly
3)Open OC4BA v3 from Add-on meny and Select Airbus image and click Airbus cockpit to enter the cockpit
When you are tired of flying a computer select a PMDG aircraft,
first leave Airbus cockpit by mouse click in Airbus cockpit window in OC4BA v3
select your PMDG aircraft in FSX/FSX-SE/P3D
then select your PMDG aircraft by clicking its image in OC4BA v3 and then click in the cockpit window
Doc revision 21012016