www.flightsim4fun.com - rksoftware

Hi Roar,

with updated Oi4FS the ADF is again not working correctly (rotaries not working). You already fixed it in the previous version.

Just tested ADF with the latest Oi4FS v1.2 and the included OiMS driver, and it works fine on my setup.

DO you have the latest versions?

Hi Roar,

checked again and yes - Oi4FS v1.2 as well as OiMS 1.5 running. Still ADF rotaries are not working while displays and TFR are working correct.
Same behavoir I noticed on 16.01. and you fixed it.
I also checked my Oi4FS-MS DEFAULT v1.0, v1.2 and 1.5 <- all same settings.

Btw. I love your work. Got my CDU and it works well, too.

Hello Roar
Would you please check the Working title G3000,on the plane Citation longitude ,everything is working except the speed on my module,,,,Citation longitude use autothorttle - working ok, except i cant change the speed on my module. i am loading the default driver...

Also the A320 nx on speed digits on my module I am getting negative numbers, it does not infulence the process...
Thank you
Juraj

Airplanes using the G3000 are not supported in the Oi4FS app, only airplanes using G1000 as stated in the description.

I will though look into the reported issue when I update the default driver in Oi4FS. If it is not too time-consuming, I will implement it.

The negative sign in the speed window in the Airbus driver is noted and will be corrected when the driver is updated.

A bug in the FLC logic of the CJ4 driver has been fixed. The updated driver will be distributed in an Oi4FS update release end of April.

Bugs in Default, B747, B787, CJ4, and A320 must be reported to this topic or directly to roarkrsp@gmail.com before April 15th to be fixed
and included in the April 30th Oi4FS update.

Hello, Oi4FS V1.4 with MSFS "working title-aircraft-cj4"

Airplane is FS MS CJ4
Script in use: Oi4FS-MS CJ4 v1.0

I need some help, please:

- AP does not light up when turning on AP. DISENGAGE is on
- no led light up when pressed any button
- ALT cannot be set, digits keep jumping back to 55000
- CMD A does not light up when pressing CMD A
- The tool is not working, there is no tool folder
- No tutorial.txt file present, so I can not see the tutorials

What did i do wrong, thank you for the help.

Joachim

- AP does not light up when turning on AP. DISENGAGE is on
- no led light up when pressed any button
- ALT cannot be set, digits keep jumping back to 55000
- CMD A does not light up when pressing CMD A

Go to MSFS's Community folder and delete the OiMS Event folder.
Verify that you have a Oi4FS_Bridge in MSFS Community folder.

As the autopilot panel in the CJ4 airplane does not have any annunciators(leds), no leds are seen on your Opencockpit MCP.
You will need to this see info in the PDF window of the airplane.
A new updated Oi4FS v1.5 will correct the missing Tools and Tutorials function.

Oi4FS v1.5 will be released and sent to all customers in a few days from now.

Hello, thanks for info.

- Events folder I had already deleted.
- The tool still needs time, ok perfekt.
- The LED of the MCP does not have annunciators (leds)ok, understood.
- Oi4FS_Bridge is alresdy in MSFS Community folder.

What is the right installation ? is it sufficient to install only the new Oi4FS (Oi4FS_v1.4_2021-03-25.zip)
or does the new program have to be copied into the old one and old files are overwritten and
new ones are added ?

Joachim

The correct installation as stated in the Oi4FS documentation is:

1.Unzip the downloaded OI4FS zip file to the SIOC folder
2.Copy the Oi4FS_Bridge folder that now is in the SIOC folder to the MSFS Community folder.
3. Delete the OiMS Event folder in the MSFS Community folder if you update from an earlier version of Oi4FS.

Hello, sorry for the silly question, just wanted to make sure it's not a
merge with the previous version.
So the new one is completely new and as far as it can work, it does.

Thanks, Joachim