OC4BAv5 config closing alone

[gef.leandro]

Hello people good night!
I have a problem with OC4BAv5 when I click on config it does not open the settings tab and the program closes alone
did anyone have this problem too?

[mvr1918]

Which OC4BA and script versions do you have?

Do you have the latest SIOC version (7.03)?

Which Opencockpits modules are connected to your PC?

Send me an image of the SIOC window.

[gef.leandro]

https://ibb.co/3r9bhcF


my Sioc I have only module Keys this other module is a mjoy16 card that sioc recognizes


https://ibb.co/Kb0DQxP

My Scripts

https://ibb.co/5LTYQ7S

when i open the settings screen the screen doesn’t open it locks after it closes

I installed all the programs that manual asks for
C ++
Net Frameworks

[gef.leandro]

had to stop using oc4v5 with pmdg to date any response ?

[mvr1918]

Try the following:



Download and unzip to your SIOC folder: https://1drv.ms/u/s!AjRjRKdTF9fGpbtbq0O ... A?e=qGtYhk


1) disconnect the mjoy device from PC
2) verify that the SIOC .ini file in SIOC folder has this text:
[SIOC]
IOCP_port=8092
IOCP_timeout=4000
Minimized=Yes
toggle_delay=20
[IOCARDS MODULE]
IOCard_disable=No
IOCard_LPT=No
[FSUIPC MODULE]
FSUipcdisable=No
FSUipcRefresh=60
[IOCP CLIENTS MODULES]
IOCPini_delay=3000
IOCPclient0_disable=no
IOCPclient0_host=localhost
IOCPclient0_port=8099
IOCPclient1_disable=yes
IOCPclient1_host=localhost
IOCPclient1_port=8092
[SOUND MODULE]
Sound_disable=Yes
Volume=100
[*]



3) Verify that you have all OC4BAv5 files in the SIOC folder
4) Start OC4BAv5 and click Config and make your configuration file and use the downloaded script OCP4NGX_v5.5P.ssi

5) if the Config still closes down, make a manual configuration by making a PMDG B737.ini file in SIOC folder with this text

[SIOC]
IOCP_port=8092
IOCP_timeout=4000
Minimized=Yes
toggle_delay=20
[IOCARDS MODULE]
IOCard_disable=No
IOCard_LPT=No
[FSUIPC MODULE]
FSUipcdisable=No
FSUipcRefresh=60
[IOCP CLIENTS MODULES]
IOCPini_delay=3000
IOCPclient0_disable=no
IOCPclient0_host=localhost
IOCPclient0_port=8099
IOCPclient1_disable=yes
IOCPclient1_host=localhost
IOCPclient1_port=8092
[SOUND MODULE]
Sound_disable=Yes
Volume=100
[*]
[PMDG B737]
CONFIG_FILE=YOUR PATH to\SIOC\OCP4NGX_5.5P.ssi
USBKeys=13,17


where YOUR PATH must be correct and the last digit 17 is changed to the number you see in Sioc's Device window