Hi All.
Im flying PMDG 777 in FSX using OCP4777x.
Need a primer to program the driver?
MasterWarning/Caution on 777 should be nice to implement
My Best // Gert Persson, Malmö
Programming the OCP4777X
Re: Programming the OCP4777X
If you go into the Script page in OC4BAv4/5 and select B77X as Airplane and then Events and Variables, you will get all the SIOC Variable numbers to use for both inputs and outputs to/from the airplane.
The MASTER Warning/Caution push button on left is 2522, the Warning message is 1451 and the Caution message is 1453.
To implement these functions to the script do the following:
1. In "Compiled scripts" in Script page right click OCP4777X_v4.5.ssi and go to "Open in SIOC Compiler"
2 In the opened Config_SIOC window click Files in the menu bar and then export to TXT
3. Save as OCP4777X_v4.5mymod.txt
4. Now you can add in new script code to this script file based on what you want to implement.
5. For MASTER WARNINGS/CAUTIONS button on left side, add
Var 2522, name MASTER_L, static, Link IOCARD_SW, Device 31, Input xx, Type I , where xx is the input number you have connected your hardware button for MASTER WARNINGS/CAUTIONS
Var 1451, name aMAST_L_WA, static, Link IOCARD_OUT, Device 31, Output xx, where xx is the output number you have connected your hardware led for MASTER WARNINGS
Var 1453, name aMAST_L_CA, static, Link IOCARD_OUT, Device 31, Output xx, where xx is the input number you have connected your hardware led for MASTER CAUTIONS
6. Save the modded txt file
7. Click another airplane line and then click B777X again to refresh listed Text scripts in Script page of OC4BAv4/5
8. Right-click and compile txt file
9. Save as OCP4777X_v4.5mymod.ssi
You also have to make a new configuration file in OC4BAv4/v5 to set up the EXPANSION/MASTER for your MIP and select the new OCP4777X_v4.5mymod.ssi
The MASTER Warning/Caution push button on left is 2522, the Warning message is 1451 and the Caution message is 1453.
To implement these functions to the script do the following:
1. In "Compiled scripts" in Script page right click OCP4777X_v4.5.ssi and go to "Open in SIOC Compiler"
2 In the opened Config_SIOC window click Files in the menu bar and then export to TXT
3. Save as OCP4777X_v4.5mymod.txt
4. Now you can add in new script code to this script file based on what you want to implement.
5. For MASTER WARNINGS/CAUTIONS button on left side, add
Var 2522, name MASTER_L, static, Link IOCARD_SW, Device 31, Input xx, Type I , where xx is the input number you have connected your hardware button for MASTER WARNINGS/CAUTIONS
Var 1451, name aMAST_L_WA, static, Link IOCARD_OUT, Device 31, Output xx, where xx is the output number you have connected your hardware led for MASTER WARNINGS
Var 1453, name aMAST_L_CA, static, Link IOCARD_OUT, Device 31, Output xx, where xx is the input number you have connected your hardware led for MASTER CAUTIONS
6. Save the modded txt file
7. Click another airplane line and then click B777X again to refresh listed Text scripts in Script page of OC4BAv4/5
8. Right-click and compile txt file
9. Save as OCP4777X_v4.5mymod.ssi
You also have to make a new configuration file in OC4BAv4/v5 to set up the EXPANSION/MASTER for your MIP and select the new OCP4777X_v4.5mymod.ssi
Re: Programming the OCP4777X
Hi Roar.
Thx for your very informative description.
I already know the most of it.
But now it almost works.
what is the 1449 for?
Next should be the Master Brightnes function.
Best // Gert Persson, Malmö
Thx for your very informative description.
I already know the most of it.
But now it almost works.
what is the 1449 for?
Next should be the Master Brightnes function.
Best // Gert Persson, Malmö
Re: Programming the OCP4777X
1449 = WARN_Reset_Sw_Pushed[0]; // MOMENTARY action
As it says, the WARN_Reset_Sw was pushed. It is an acknowledge message from the airplane's SDK
As it says, the WARN_Reset_Sw was pushed. It is an acknowledge message from the airplane's SDK