Page 1 of 1
787 module crashed now cant restart
Posted: Sat Jul 27, 2019 1:16 pm
by drayton_k
Hi Roar,
I am currently fying in the 787 and was using the module fine. After a couple of hours the module decided to crash out and stop responding. How can I restart this now,as the new version starts automatically when I select the aircraft?
If I run the OC4BAv4 from the P3d menu bar there is no option for the 787
Thanks
Keith
Re: 787 module crashed now cant restart
Posted: Mon Jul 29, 2019 12:37 pm
by mvr1918
Good question!
The OC4B787 driver is a .dll to P3D that means it is a program extention to P3D.
So, there is no way to restart the dll than to restart the main program P3D.
But, it could also be that it is only the SIOC.exe that crashed. Have you tried to restart the SIOC.exe from the SIOC folder?
Re: 787 module crashed now cant restart
Posted: Mon Jul 29, 2019 8:08 pm
by drayton_k
Yes, I tried the SIOC restart but this did not help.
If I have a crash with the 777 (which I seem to have a lot) I can restart this without a problem with the old method. I have never had a crash wth the 747 driver though, thats rock solid.
Thanks anyway
Keith
Re: 787 module crashed now cant restart
Posted: Tue Jul 30, 2019 4:31 pm
by mvr1918
I will look into this issue when I am back from holiday.
Re: 787 module crashed now cant restart
Posted: Thu Aug 29, 2019 6:14 pm
by drayton_k
Hi Roar,
Have you made any progress on this at all?
Thanks
Re: 787 module crashed now cant restart
Posted: Fri Oct 11, 2019 3:13 pm
by mvr1918
As I said I will look into this issue when back from holiday.
I started my long holiday 8 years ago and not sure when I will be back:)
Joke aside, no I haven't had any time for it, but I will look into it this weekend to see if something smart can be done.
Do you have crashes when using the B737 driver?
How long is a typical flight before it crashes? Both 777 and 787 flights?
Re: 787 module crashed now cant restart
Posted: Wed Oct 30, 2019 9:40 pm
by drayton_k
Hi Roar,
I mainly stick to sub 3 hour flights. Its not every time though that the 777 or the 787 fails. The 777 is easy enough to restat the old way but the 787 I am unable to do as it uses the new way of starting it.
The 737, 747 never crash.
Enjoy your holiday
Cheers
Keith
Re: 787 module crashed now cant restart
Posted: Sat Feb 01, 2020 8:36 am
by drayton_k
Roar,
Any news yet ?
Re: 787 module crashed now cant restart
Posted: Sat Apr 03, 2021 2:55 pm
by drayton_k
Roar,
Have you had a chance to take a look at this?
Re: 787 module crashed now cant restart
Posted: Wed Apr 07, 2021 6:51 pm
by mvr1918
Sorry for this late reply and not so good answer to your problem.
I looked into the issue some time ago but probably forgot to get back to you at that time.
At that time I couldn't find any restart issues when running the driver.
Due to the many updates of QW787 since I wrote the driver program, I believe the issue is related to some kind of timing conflict between the driver(dll) and values of some of the Local Variables in the QW 787.
As there are almost 4 years since I wrote the driver software code and that the QW787 has had many updates since then, digging further into this issue will take too much time.
I am now deeply into development for the MSFS. There is a B787 in MSFS and I have support for it in Oi4FS. See my website for more information.