Page 1 of 1
OC4BAv4 config problem[SOLVED]
Posted: Sun Aug 19, 2018 11:41 pm
by martin
Hello,
I have a problem with the config button when I press the config button in the OC4BAv4 then the config screen disapears after 1 second so I cannot make any config settings for the airbus but all other PMDG settings are ok and everything works fine exept the airbus because I cannot make the necessary settings.
Regards martin.
Re: OC4BAv4 config problem
Posted: Mon Aug 20, 2018 9:29 am
by mvr1918
This could happen if your installation is not correct.
Check that your SIOC.ini file in the SIOC folder. The SIOC.ini that comes with OC4BAv4 has this text:
[SIOC]
IOCP_port=8092
IOCP_timeout=4000
Minimized=Yes
toggle_delay=20
[IOCARDS MODULE]
IOCard_disable=No
IOCard_LPT=No
[FSUIPC MODULE]
FSUipcdisable=No
FSUipcRefresh=60
[IOCP CLIENTS MODULES]
IOCPini_delay=3000
IOCPclient0_disable=no
IOCPclient0_host=localhost
IOCPclient0_port=8099
IOCPclient1_disable=yes
IOCPclient1_host=localhost
IOCPclient1_port=8092
[SOUND MODULE]
Sound_disable=Yes
Volume=100
[*]
Re: OC4BAv4 config problem
Posted: Mon Aug 20, 2018 2:59 pm
by martin
Hi,
My SIOC ini file is exact the same as the example you send me.
Regards martin.
Re: OC4BAv4 config problem
Posted: Mon Aug 20, 2018 4:02 pm
by mvr1918
Are all OC4BAv4 files installed correctly to SIOC folder.
Check in Windows Event Viewer under Windows Log/Applications App to see if you find an error log. Show me that log.
Re: OC4BAv4 config problem
Posted: Mon Aug 20, 2018 9:16 pm
by martin
Hi,
For me all OC4BAv4 files are correct installed but I found a error in the Windows Event Viewer see the attachments.
Regards martin.
Re: OC4BAv4 config problem
Posted: Mon Aug 20, 2018 11:25 pm
by mvr1918
The KernellBase.dll error is caused by an improper installation of the NET framwork on your PC. Try to uninstall Net.Framwork and reinstall or just reinstall Net Framwork again. Search issue with
Google to see this problem.
Re: OC4BAv4 config problem
Posted: Sun Aug 26, 2018 4:59 pm
by martin
Hi,
Is there a way to put the airbus manually in the OC4BAv4 because reinstalling the kernellbase.dll is not a option because removing and reinstalling can result in a major problem with windows because it is a part of windows there are several warnings on the internet do not remove and reinstall the KernelBase.dll.
Regards martin.
Re: OC4BAv4 config problem
Posted: Sun Aug 26, 2018 7:14 pm
by mvr1918
You have to read MUST READ OCP4ABX.txt
then instead of the auto config below:
2) Go to OC4BAConfig
- Select AS Airbus X as aircraft, then select ocp4abx_v1.0 as script
- the P&P MCP;EFIS;FMC should pop up
do the following:
Copy the text in PMDG B737.ini to AeroSoft Airbus.ini and replace the ssi file name to OCP4ABX_v1.1.ssi
Re: OC4BAv4 config problem
Posted: Mon Aug 27, 2018 1:58 pm
by martin
Hi,
Thanks for your help everything works fine now.
Regards martin.
Re: OC4BAv4 config problem
Posted: Mon Aug 27, 2018 9:46 pm
by mvr1918
Fine. I mark this topic as SOLVED