Page 1 of 1
Nav and com radio encoders slow
Posted: Thu Mar 15, 2018 5:24 pm
by sreen74
I start OC4BA ok and when I switch ground power and battery switch on all panels illuminate, however when I try and tune nav or com radios they are very slow to respond. As soon as the APU is switched on and running they start working correctly.
Does anybody have any ideas?
Re: Nav and com radio encoders slow
Posted: Thu Mar 22, 2018 7:40 pm
by mvr1918
I have seen this, but do not remember what causes this, but I believe this issue came with the latest P3Dv4.2. I will look into it and come back to you.
Re: Nav and com radio encoders slow
Posted: Sat Apr 07, 2018 12:35 pm
by mvr1918
Are you getting slow, erratic digits in MCP also or is just the radios when APU or GENs are off?
Re: Nav and com radio encoders slow
Posted: Fri Apr 13, 2018 6:55 pm
by sreen74
Just the radios when apu and gen are off
Re: Nav and com radio encoders slow
Posted: Mon May 14, 2018 9:03 am
by mvr1918
This issue was introduced with the latest P3Dv4.2 I believe. I will have a look to see if a fixed can be done.