Page 1 of 1
ATC Transponder digits do not light up.... (SOLVED)
Posted: Wed Feb 14, 2018 7:01 am
by Wardie
My Opencockpits transponder was working with PMDG737 without a problem. I have now rebuilt my setup and reloaded all the software. The transponder backlighting shows up and I get the red XPNDR fail light. However when I activate the OCP4NGX program the digits do not show up. I have loaded the setup program as received from Opencockpits however I notice that it has not been linked under the configuration screen. Please see images below. I don't remember originally having to do anything special, I was under the impression that it is Plug and Play? Any help appreciated! Thanks!
Re: ATC Transponder digits do not light up....
Posted: Wed Feb 14, 2018 11:16 pm
by mvr1918
Run the OC4BAv4/Config again and select PMDG B737 cockpit and then OCP4NGX_v4.5.ssi script. ATC with the rest of the P&P modules should be listed in the Cockpit configuration. The you link the modules in MOdules with correct Operations. This is all detailed in the documentation.
Re: ATC Transponder digits do not light up....
Posted: Thu Feb 15, 2018 9:31 am
by Wardie
Apologies for that, I did it all but did not double click on OCP4NGX_v4.5.ssi again...... Working perfectly now! I am slowly learning and gaining experience! Many thanks once again!
Re: ATC Transponder digits do not light up.... (SOLVED)
Posted: Thu Feb 15, 2018 9:59 am
by mvr1918
Glad you got it working. I know it works if it is done correctly as described in the documentation. I close this topic now.