Problems to make the MCP by Opencockpits work on P3D

[Cmte. Pena]

Hello everybody!

I downloaded the files in Opencockpits site (here: http://www.opencockpits.com/uploads/scr ... 37_NGX.zip ) to make my EFIS and MCP work on 737NGX, but only the EFIS goes well. The MCP digits goes on but the Altitude indicator just stay with only 3 digits on and the MCP don't communicate with the simulator.

Some informations:
EFIS and MCP (by Opencockpits) captain side;
Prepar3D v3.4;
Windows 7.

I know this files don't have Roar support, but I´m starting to make make home cockpit and I intend to buy his software in a future.

Please, can you help me to make MCP on?

Best regards from Brazil!

[mvr1918]

HI,

The driver you ar enow using will not work with the latest updated PMDG B737 NGX SP1D version. A new SDK (SP1D) from PMDG was released after the driver was
released for SP1C. It will not work, sorry.

[Cmte. Pena]

HI,

The driver you ar enow using will not work with the latest updated PMDG B737 NGX SP1D version. A new SDK (SP1D) from PMDG was released after the driver was
released for SP1C. It will not work, sorry.

The version I´m using is: PMDG 737-800/900NGX for Prepar3D VERSION v1.10.6461, 30SEP15.

[mvr1918]

You will need OC4BAv4 to get your MCP to work.

[Cmte. Pena]

You will need OC4BAv4 to get your MCP to work.

Roar, my MCP is the first version of MCP by Open. Is there any problem to use OC4BAv4?

[mvr1918]

It should work OK, I believe. If there is a need to change the input/output numbering plan to fit the OCP4NGX driver I will help you get it working.

[Cmte. Pena]

It should work OK, I believe. If there is a need to change the input/output numbering plan to fit the OCP4NGX driver I will help you get it working.

Ok, sounds good! I bought it.

I´m waiting for your confirmation.

Thanks!

[Cmte. Pena]

It should work OK, I believe. If there is a need to change the input/output numbering plan to fit the OCP4NGX driver I will help you get it working.

Hi, Roar!

I can't make OC4BA turn on with P3D.

When I inniciate P3D the OC4BA screen blinks and goes by. After I select 737 NGX (systems on) and try to e OC4BA via Add-on menu it not open.

P3D is at: E:\Lockheed Martin\Prepar3D v3
SIOC and OC4BA are at: E:\SIOC

Is this the problem?

What could be wrong?

[mvr1918]

SIOC folder path should be

E:\Lockheed Martin\SIOC

All SIOC files and all OC4BA files should be In SIOC folder

[Cmte. Pena]

SIOC folder path should be

E:\Lockheed Martin\SIOC

All SIOC files and all OC4BA files should be In SIOC folder

Ok. I'll change everything and will report.

Another question: what country are you? I'm asking cause we have different time zones.