www.flightsim4fun.com - rksoftware

Good morning everyone, I'm new and a greeting to all.
I have this problem with OC4BAv.4.3.1.0 the EFIS MCP works perfectly while I work only while the rotary switches and the LEDs do not work.
This only happens with FSX while P3D is fine.
the modules are of Opencokpit and P & P.or configured as a tutorial but nothing
Thank you

Not sure if your problem is with the B737, B747 or B777 as you mentioned only OC4BAv4.


Have you set this in the PMDG :

[SDK]
EnableDataBroadcast=1

to enable the aircraft data sending from the ***_Options.ini file for the airplane you use.