Opencockpits EFIS - Range Switch [SOLVED]

[Voodoo23]

Many thanks for the awesome driver for an awesome plane!
Everything works fine for me but one issue. The EFIS Range Switch is only working from 5 - 320 Nm. I can't switch to 640 Nm because it is on the end of the range:

Hardware 5Nm - Software 5Nm
Hardware 10Nm - Software 5Nm
Hardware 20Nm - Software 10Nm
Hardware 40Nm - Software 20Nm
Hardware 80Nm - Software 40Nm
Hardware 160Nm - Software 80Nm
Hardware 320Nm - Software 160Nm
Hardware 640Nm - Software 320Nm

Any suggestions?

Tusen takk
Dominik

[Voodoo23]

Still the same problem with script 4.1

[mvr1918]

I know. I haven't changed this yet. I need to verfiry this in my cockpit, before I make changes to the code.

I am out travelling at the moment.

[mvr1918]

Fixed,

Download new OCP4747X_v4.2.ssi script file from OC4BAv4's "Check4 Updates" button.


Rememebr to also make changes to your configuration file, so the new ssi file is used.