mvr1918 wrote:Fine if you could share the way to get the FMC dsiplay correct.
Hi,
This is what I did to make it work for me.
I changed the entry for window01 in the Airbus panel.cfg files to this:
[Window01]
file=../../Aerosoft Airbus A320_A321 Base/Panel_Fallback/
Panel_2d.bmp
file_1024_night=../../Aerosoft Airbus A320_A321 Base/Panel_Fallback/
Panel_2d.bmp
Background_color=0,0,0
size_mm=
600,800
window_size_ratio=0.250
position=
0
visible=0
ident=10021
window_size=
0.116, 0.750
sizeable=
1
gauge00=../SimObjects/Airplanes/Aerosoft Airbus A320_A321 Base/Panel_Fallback/DLLs/FMGS!FMGS1,
0,0,600,800, 2
You can delete all the other gauge entries for window01 as they are no longer needed.
This gives you just the FMC screen when you press Shift+2. It's just then a case of undocking the window and dragging it across to the Opencocpits FMC and selecting fullscreen...voila!
I am running a 3 monitor setup at a resolution of 5860 x 1080 using Nvidia surround. If you have a single monitor you may need to play around with the size_mm and/or window_size to get it right, although the window can be resized by dragging. Once you have it how you like it duplicate your size_mm numbers at the end of the gauge00= line, but make sure you don't get rid of the number 2. I don't know what it does, but I do know that the FMC buttons won't work if it's not there.
Hope this helps. I struggled to find any info on the internet and spent several days sorting this out. I hope this will stop others suffering the same torment.
Regards,
Mick
