www.flightsim4fun.com - rksoftware

My system
W8.1, SIOC 50B5 , OC4BA v3, P3D v2.5, OCP4NGX_255 renamed to OCP4NGX.exe, OCP4NGX_v3.4.ssi (custom), var 2800 =1 .
I have a self made panel. Everything is Ok. The exception is the Logo Lights. I started the NGX , bats ON, power ON, Ok
I used the NGX screen panel (not a hardware) to power ON all lights (taxi, AntiColision, Landing, Logo...) all of them are Ok and ON.
When I started the OCP4NGX.exe all lights remains ON but Logo Lights goto Off. I used the button to lights ON but....nothing happens. Just for Logo Lights. For the others is Ok.
I tried to input value trough IOCPConsole, also starting before the OCP4GX drive first with the Cold&dark panel but the result is the same. The Logo Lights remains off.
I am using the button in the NGX panel OVH but without success.
Can help here Roar ?
Thx
Mauricio

Hi,

Can you try with the latest OCP4NGX_261 driver and latest OCP4NGX_v3.8 script.

I have sent you a download link in a PM.

I just found the issue also in my setup.

I will investigate

Checked this again and found out it is working as described in the B737 operation manual.

In order for the Logo light to work the OVH Cab_Util Sw must be turned ON.