www.flightsim4fun.com - rksoftware

I have a OC MCP v3 and a OC Servocard. The MCP is working fine but seems to be buggy.

So 2 Questions :

How can i get the servo card connected to MIP Servo - it is for a flaps indicator ? If i use the PP script the MCP is working but not the servo card even as it is configured via OC4BAConfig. The servo card works fine with an own flaps script ...

My MCP v3 only works with the PP script - 2.9b not at all ... My MCP sometimes seems to be buggy - as i rise ALT via OC4BAv3 it starts suddenly to value down not up in both directions - but works fine with other scripts. Is this a known bug ?

Many happy landings

Andi

As you are having a Servo card you must use the non-PP script. The PP script do not have any code lines for any other devices than the PP devices like MCP, EFIS,CDU,Radios.

In OC4BAConfig you select the detected Servo card and link it with the MIP_Servo1

In order to work OK you must have connected the flaps gauge servo to the right connection as stated in the script ( the script has Output 2 defined)

You should also use the latest driver and script.

Send a request for the latest programs to roarkrsp@gmail.com