www.flightsim4fun.com - rksoftware

I have OCP4BA V3 and OpenCockpits MCP v2 installed in FSX. The issue I am having is the Knobs on the MCP are not matching the fucntions on the PMDG 737 NGX. When I turn the heading knob the autopilot disengage switch moves and when I turn the altitude knob on the MCP the course display changes values in the 737. Also when I turn the altitude knob on the MCP the course readout on the PMDG 737 changes. When I go to the info tab on the OCP4BA screen there is no green check mark on the MCP and when i go to configuration for detected hardware it say EXP/MASTER -86. I am using the OCP4NGX_PPv1.2.ssi. Am I missing a step? Someone please help as this is frustrating. Also the path to my SIOC folder is C:\Program Files (x86)\Microsoft Games\SIOC.

Hi,

Tell me the OCP4NGX.exe version number you are using? Right click OCP4NGX.exe in SIOC folder and see under detail to find version number.

Send the text of you sioc.ini file.


There seems to be some issue with your setup that must be corrected.
Roar

I am running OCP4NGX version 2.4.7.0

[SIOC]
IOCP_port=8092
IOCP_timeout=4000
Minimized=Yes
toggle_delay=20
[IOCARDS MODULE]
IOCard_disable=No
IOCard_LPT=No
[FSUIPC MODULE]
FSUipcdisable=No
FSUipcRefresh=60
[IOCP CLIENTS MODULES]
IOCPini_delay= 3000
IOCPclient0_disable=no
IOCPclient0_host=localhost
IOCPclient0_port=8099
IOCPclient1_disable=yes
IOCPclient1_host=localhost
IOCPclient1_port=8092
[SOUND MODULE]
Sound_disable=Yes
Volume=100
[*]
CONFIG_FILE=OCP4NGX_PP_v1.2.ssi
MASTER=15,4,1,86

I do not know how you have managed to get the line

MASTER=15,4,1,86

Did you run OC4BAConfig?

Anyway. You can just edit your sioc.ini in the SIOC folder to

MASTER=15,5,1,86

Tell me if you succeeded, so we can close this thread

Ok I will give it a try give me a sec

Ok changed the lines in the sioc.ini to MASTER=15,5,1,86. Once I click on the cockpit picture in the OC4BA config and go into flightsim the readouts on the MCP illuminate just like before but the functions still don't match. When I recheck the sioc.ini file it has changed the value back to MASTER=15,4,1,86

Hallo,
I am new in this Forum and I have a Problem like the above issue.
I have a Opencockpit MCP V3 and a PMDG 737NGX with FSX. I installed the Hardware and
installed the Software like the instructions on the download. The MCP works only in one direction -
when I changed the heading in the FS the digits changed on the MCP in the same way. But when I changed the heading on the MCP there is no change in the FS!!!
On the other hand the knobs will work in both directions - f.e. F/D on/off or A/T ARM or V/S or ALT HLD or CMD A and so on.

Can anybody help me?
I am glad to hear you!

Yours - Peter

Schlerith wrote:Hallo,
I am new in this Forum and I have a Problem like the above issue.
I have a Opencockpit MCP V3 and a PMDG 737NGX with FSX. I installed the Hardware and
installed the Software like the instructions on the download. The MCP works only in one direction -
when I changed the heading in the FS the digits changed on the MCP in the same way. But when I changed the heading on the MCP there is no change in the FS!!!
On the other hand the knobs will work in both directions - f.e. F/D on/off or A/T ARM or V/S or ALT HLD or CMD A and so on.

Can anybody help me?
I am glad to hear you!

Yours - Peter

Hi,

Do the other rotaries work OK, IAS, ALT VS and CRSs?

No, all digits work only when I change them in the FSX - then they will change on the MCP. But when I turn the digits (Speed, heading, altitude, V/S, course) on the right number, there is no reaction in the FSX.

Do you know why?

Many thanks - Peter

Bonjour à vous tous
Comme vous autres ,j'ai un problème d'installation de mon MCP V et FIS V2....
Voici la réponse de OpenCockpit..
Question:En ce qui concerne mon computer:

Windows7 édition familiale service pack1 64 Bits

Processeur Intel cor 4 coeurs

Carte graphique NVIDIA Geforce GTX en panoramique sur 3 écrans

FSX (édition professionnelle) +pack accélération

FSUIPC (version 4.93 Ga du 25/08/2014) sur lequel j'ai un trottle.(version payante)

SIOC Ver 4.6

Utilisation : PMDG 737 NGX 700/800/900 et PMDG 777

Alimentation d' origine 6V sur le MCP et alimentation de 6V sur l'EFIS.


Réponse:
Allo Jean.
Merci pour l'information. L'EFIS est alimentee par 5V seulement (avec 6V vous pouvez lui bruler).
Vous etes en utilisant l'autoconfig avec la version 3 du MCP et la version 2 du EFIS sur PMDG NGX et ce logiciel a la besoin d'un logiciel special que n'est pas notre: OC4BA, qu'a deux versions: gratuit et de paiment, je vous recommend la version de paiement parce que est tres bon et a un bon service de support.
Aussi est tres recomendable de telecharger una version plus neuf du Sioc.
Merci.

Alejandro Cano,
Opencockpits Support Team