OC4BA v2 Crash

[AlexB]

Hello,

my Name is Alex, I´m 32 and live in Germany.
My English isn´t very good, sorry for that.

My System:

Win7 64bit
Intel i5 2500k
Geforce GTX 760
16GB RAM

I use the OC4BA v2 5814 and SIOC 5.05b

My problem is the crash of the OC4BA Driver.
After starting it crashs after a maximum of 2min. Even when using a knob or doing nothing.
After reloading it crashs more faster, sometimes directly after being loaded.

I removed SIOC, OC4BA and the PMDG737NGX and installed it again but nothing changed.

Here the text from the Event Display (allways the same)

Name der fehlerhaften Anwendung: OCP4NGX.exe, Version: 0.0.0.0, Zeitstempel: 0x537e16a5
Name des fehlerhaften Moduls: MSVCR100.dll, Version: 10.0.40219.325, Zeitstempel: 0x4df2be1e
Ausnahmecode: 0xc0000417
Fehleroffset: 0x0008af3e
ID des fehlerhaften Prozesses: 0xf14
Startzeit der fehlerhaften Anwendung: 0x01cfc145dd662f6b
Pfad der fehlerhaften Anwendung: F:\SIOC\OCP4NGX.exe
Pfad des fehlerhaften Moduls: C:\Windows\system32\MSVCR100.dll
Berichtskennung: 2f739c07-2d39-11e4-a65d-002522dc3db7

Do you have any idea what´s the Problem?

Thanks

Alex

[mvr1918]

Hi Alex,


This problem has been reported by some of the users and is a tricky one to resolve due to lack of good crash information.

What I can see of the inforamtion I get from you is that it is not OCP4NGX that crashes, but a MS dll that is used by OCP4NGX.

Most users , myself included don't have these crashes. I believe it has something to do with your specific PC setup.

What type of Opencockpits modules do you have connected to your flightsim?
Do you have the C++ redistributable 2010 installed?
Do you overclock your CPU?

Which other FSX type addons do you have installed?

Are you running any virus protection software on the drive/folders that OC4BA v2 is installed to?

I will send you a special OCP4NGX.exe that I want you to try. Just unzip it over the "old" one after taking a backup.
I need you feedback on the questions above before I sent the "new" OCP4NGX.

/Roar

[AlexB]

Hi,

I have connected:

OC FMC V3
1xUSB Expansion
2xMaster
1xDisplayDriver
1xUSB Servo

My CPU is overclocked @4,4, the FSX Gold SP2 incl. SIOC is on its own Samsung SSD (F:/)

The system is protect by Avira Antivir

I have installed:
FS Global 2008
REX Essential
Ultimate Terrain Europe
ProATC X
Aerosoft AES
Aerosoft Frankfurt EDDF
Aerosoft München EDDM
Aerosoft VFR Germany 1
Aerosoft VFR Germany 3
Aerosoft Airbus X Extended
Aerosoft Diamod Katana X
Aerosoft Frankfurt-Hahn EDFH
Aerosoft Mallorca X
Aerosoft London Heathrow
Aerosoft Madrid
Aerosoft Sharm El Sheikh
Aerosoft Innsbruck
Flight InfoBox
Hurghada X
MyTraffic X
Super Traffic Board
PMDG 737 800/900NGX
PMDG 747-400
PMDG 777 incl. -300ER



Thanks

[AlexB]

Hi,

I tried the special OC4NGX.exe and it works much better.

I did three flights and had only 1 Crash. This time OC4NGX.exe Crashs, not the MSVCR100.dll

Name der fehlerhaften Anwendung: OCP4NGX.exe, Version: 2.4.2.0, Zeitstempel: 0x53fe33b9
Name des fehlerhaften Moduls: OCP4NGX.exe, Version: 2.4.2.0, Zeitstempel: 0x53fe33b9
Ausnahmecode: 0xc0000417
Fehleroffset: 0x00016ef7
ID des fehlerhaften Prozesses: 0xa3c
Startzeit der fehlerhaften Anwendung: 0x01cfc2c6060e75a7
Pfad der fehlerhaften Anwendung: F:\SIOC\OCP4NGX.exe
Pfad des fehlerhaften Moduls: F:\SIOC\OCP4NGX.exe
Berichtskennung: a6b54623-2eb9-11e4-be4e-002522dc3db7

Alex

[mvr1918]

Hi

Just so I know the a little bit more.

Did you install the MS C++ redist 2013?

Which ssi file was loaded? The latest pp_v1.0 or the 2.8b.ssi?

[AlexB]

Hi,

Yes, I have installed the MS C++ r.

I use the 2.8b.ssi, because I have build my Overhead + MCP with the Master and servo Card by myself.