Page 1 of 1

A/T LED problem on MCP

Posted: Mon Jul 15, 2024 6:09 am
by Mladen
A/T LED will not lit when A/T is armed. Switch in VC (Virtual Cockpit) moves in ARM position and green light illuminates but LED on the OC MCP does not lit.
I use 1.2 driver

************************************
[SIOC]
IOCP_port=8092
IOCP_timeout=4000
Minimized=Yes
toggle_delay=20
[IOCARDS MODULE]
IOCard_disable=No
IOCard_LPT=No
[FSUIPC MODULE]
FSUipcdisable=No
FSUipcRefresh=60
[IOCP CLIENTS MODULES]
IOCPini_delay=3000
IOCPclient0_disable=no
IOCPclient0_host=localhost
IOCPclient0_port=8099
IOCPclient1_disable=yes
IOCPclient1_host=localhost
IOCPclient1_port=8092
[SOUND MODULE]
Sound_disable=Yes
Volume=100
[*]
[PMDG B777]
CONFIG_FILE=C:\SIOC\Oi4FS\PMDG B777 v1.2.ssi
MASTER=15,15,1,40
MASTER=7,7,1,38
MASTER=11,11,1,49
MASTER=8,8,1,46
MASTER=19,9,1,9
MASTER=9,9,1,48
MASTER=10,10,1,47
************************************

Gr, Mladen

Re: A/T LED problem on MCP

Posted: Fri Jul 19, 2024 5:51 pm
by mvr1918
These Leds on the Opencockpits B737 hardware module are not used in the 777 driver and scripts anymore. They are disabled in latest script.

There is none green light for AT ARM on the virtual 777 MCP. (At least not on any 777 MCP I have seen)