Page 1 of 1
ATC selector switch not working [Solved]
Posted: Tue Jul 02, 2024 5:27 am
by Mladen
Unfortunately ATC Selector Switch is not working.
Both rotary knobs for tuning the Squawk code are working OK.
This is mu SDK setting in 777_Options.ini
[SDK]
EnableDataBroadcast=1
EnableCDUBroadcast.0=1
EnableCDUBroadcast.1=1
EnableCDUBroadcast.2=1
How should I solve this "problem"?
Thanks
Gr, Mladen
Re: ATC selector switch not working
Posted: Tue Jul 02, 2024 5:40 pm
by mvr1918
The ATC Mode knob is not working due to issues in the PMDG 777 SDK.
The issue has been reported to PMDG and must be fixed by them.
An updated PMDG 777 driver will be sent out to all users when it is fixed.
Re: ATC selector switch not working
Posted: Sat Jul 13, 2024 4:08 pm
by mvr1918
The ATC Mode selector issue, has been solved and is working in latest version of the 777 driver ans script.
Re: ATC selector switch not working [Solved]
Posted: Sun Jul 14, 2024 5:20 pm
by Hans K
Hi Roar,
The latest driver version I have received and installed is version 1.1 and unfortunately the ATC mode switch doesn't still work.
Regards,
Hans
Re: ATC selector switch not working [Solved]
Posted: Sun Jul 14, 2024 9:33 pm
by mvr1918
Are you using the latest 1.2 script?
Re: ATC selector switch not working [Solved]
Posted: Mon Jul 15, 2024 6:03 am
by Mladen
I can confirm that ATC selector switch is not operational. While selecting different Modes on OC ATC module the selector knob in the VC (Virtual Cockpit) is moving but no signal is sent to ND (Navigation Display) or Pilot clients on vPilot or IVAO Altitude.
I use 1.2 driver
Gr, Mladen
Re: ATC selector switch not working [Solved]
Posted: Mon Jul 15, 2024 9:11 am
by Hans K
Hi Roar,
I can confirm the observations of Mladen: knob is moving in the VC but no further action. By the way, I am using script version 1.2.
Greetings,
Hans
Re: ATC selector switch not working [Solved]
Posted: Mon Jul 15, 2024 5:47 pm
by mvr1918
I will check it out and fix it (if possible) when I am back where I have my Opencockpits modules.