PMDG B777 in P3D
Posted: Sun Oct 08, 2023 10:08 am
Apologies for this sumbission as it concerns P3D rather than MSFS, but I've been emailing Roar for days now but all are returned as failed delivery.
I recently purchased and installed Oi4FS to run with P3Dv4 but cannot get my MCP and EFIS modules to show any readouts when operating the program. All my planes, Open Cockpit modules and script files are populated in the configuration option, and the correct script file appears in column 5 when selecting the B777.
Selecting the FLY option and clicking the 777, SIOC connection screen appears briefly, then the Oi4FS screen disappears after a few seconds but there is no connection to my module readouts.
OCP4 files 777X.bmp and driver files have been transferred over, with the script file renamed as advised and a check of 777X_options.ini shows the [SDK] EnableDataBroadcast=1 to be present.
I'm at a loss as to what to try next, so is there anything else I could check
Ron
I recently purchased and installed Oi4FS to run with P3Dv4 but cannot get my MCP and EFIS modules to show any readouts when operating the program. All my planes, Open Cockpit modules and script files are populated in the configuration option, and the correct script file appears in column 5 when selecting the B777.
Selecting the FLY option and clicking the 777, SIOC connection screen appears briefly, then the Oi4FS screen disappears after a few seconds but there is no connection to my module readouts.
OCP4 files 777X.bmp and driver files have been transferred over, with the script file renamed as advised and a check of 777X_options.ini shows the [SDK] EnableDataBroadcast=1 to be present.
I'm at a loss as to what to try next, so is there anything else I could check
Ron