www.flightsim4fun.com - rksoftware

Hi,
It's been a while I'm trying to make the Airbus Radio module working on MSFS with CJ4 but I can not.
I have seen another post from ZillaUK where he explain how he made it but I can not.
Lately I tried a script from Roar specofoc for CJ4 and there was a good progress but still not there.
When I used the script from Roar the COM1 and COM2 works fine, the ADF works fine but the NAV on MSFS CJ4 keeps changing values between the one I put through the module and another freq 117.5. Do be more specific, I put a frequency (112,2 for example) on the radio module and I press the swap button. The frequency ques to active in the module but in the CJ4 the value changes between the one I add and another frequency 117,5, which I can not understand how this frequency is coming up.
Any help?
Thank you in advance
Spyros

If you active LOG ON in IOCPConsole before you change the NAV1 and hit TRF and copy the activities and show it here, I can have a look at it.

Hi,

I was out so I couldn't test what you suggested.

Today I managed to run the test and below you can see all the steps I took.

I started MSFS2020 and I loaded the CJ4 dark and cold. I started the engines and I went to the tune page of FMS.

Then I loaded the IOCModules, I run the OiMS v1.5, I loaded the SIOC application and as a final step I logged into the IOCP console.

Then on the airbus radio module I pressed the NAV button and then the frequency 109.00 followed by the swap button .

The frequency begun to change from 117.5 to 109.00.

Screenshots from IOCP Console attached

I remain availbale

Spiridon

Then I loaded the IOCModules, I run the OiMS v1.5, I loaded the SIOC application and as a final step I logged into the IOCP console.

Do not run IOCModules, just click the CJi image to start up SIOC and the OiMSCJ4 driver.

Hi,

if I do not run the IOCModule.exe the panel stays always dark.

The module lights up only when I run the IOCmodule

Any idea why ?

and trying to help I attach the main and the setup screen of SIOC

What is the text in the FS_MS_CJ4.ini?

[SIOC]
IOCP_port=8092
IOCP_timeout=4000
Minimized=Yes
toggle_delay=20
[IOCARDS MODULE]
IOCard_disable=No
IOCard_LPT=No
[FSUIPC MODULE]
FSUipcdisable=No
FSUipcRefresh=60
[IOCP CLIENTS MODULES]
IOCPini_delay=3000
IOCPclient0_disable=no
IOCPclient0_host=localhost
IOCPclient0_port=8099
IOCPclient1_disable=yes
IOCPclient1_host=localhost
IOCPclient1_port=8092
[SOUND MODULE]
Sound_disable=Yes
Volume=100
[*]
[FS_MS CJ4]
CONFIG_FILE=Oi4FS-MS CJ4 v1.0-R.ssi
MASTER=12,12,1,92

Looks OK.

Start up the driver by clicking the CJ4 image in Oi4FS. What is the SIOC Device window showing?

The display below