www.flightsim4fun.com - rksoftware

Opencockpits N1 set SPD ref Autobrake panel

The rotary dials are detected as inputs 40 and 52 for the (inner) N1 speed set and Speed ref adjustment dials on siocmonitor but they dont actually do anything in my P3d

The outer dials (N1 set auto/both/1/2) and (spd ref auto/V1/VR/WT/VREF/SET) all work as they should

anyone know what code Im missing or how to correct it omease as i'm not very good with coding

Many Thanks

Both the N1SET_Control and SPEED_REFERENCE_Control are not implemented in the default scripts that come with OC4BAv5.

Both Events are implemented in the driver code, so if you write the correct script code for it, they should both work OK, I believe.

You can test the functions by sending 1 and 0 to Variable 2562 and 2565 in IOCPConsole to test that the driver sends the values to the airplane.

If that works, you could write the script code or hope that someone already has made the script. I have no time for this now as I am not in the country where I have my cockpit setup.

Has anyone made a script for this yet please?

James