www.flightsim4fun.com - rksoftware

I have not much knowledge about the MultiRadio module, so I need to understand it a little more before I can find out what can be done.

Does the MultiRadio works with MSFS 2020 now when you

Start MSFS and select an airplane
Start FSUIPC7
Start IOCModule


I guess it should work?

Hi,
yes it does perfect, 100% on all positions.
MCP and EFIS with oi4fs and multiradio with iocmodules, all together.

Joachim

As the Multiradio is a very special module it is not supported in Oi4FS.

A simple way to start up the OiMS driver together with the MultiRadio driver is to make a bat file
that

copy FS_MS Default.ini to SIOC.ini
starts SIOC.exe
starts OiMS.exe
start IOCModule.exe

The bat file should be in SIOC folder and then create a shortcut to have on your desktop

Google "how to make bat file" to find how to make a bat file.

Hi,

I'm French my english is not fluent, I will try to explain my problem.
Stuff:
-MCP V2
-EFIS V1.2
-ATC

I bought the soft this morning, and I followed the pdf tutorial. Look like not working with different planes. Maybe I made something wrong.
All the material is detected by Oims and sioc but look off without any posibility to turn buttons or switchs (like that https://prnt.sc/wlswzc).

It work perfectly with Xplane 11.

Video on default G1000 :
PART 1: https://streamable.com/disruf
PArt 2: https://streamable.com/rxm5je

Some screens :
Files location : https://prnt.sc/wlszi3
OiMS : https://prnt.sc/wnetj8
OiMS Log : https://prnt.sc/wnevjh
SIOC : https://prnt.sc/wnewag
SIOC Config Devices : https://prnt.sc/wnexl5
FS_MS Default : https://prnt.sc/wnev0r


Cheers, Sylvain.

Sorry for this delay in response. I have checked your videos and you have configured the default plane OK.

The Oi4FS works only for the default airplanes using the G1000 system and some other default airplanes that uses another avionic system that is compatible with the G1000.

The B747, B787, and A320 do not work with this driver.

You need a separate to work for B747 from the www.flightsim4fun.com

I can’t hear in the video you sent what is not working.

Please describe in the Forum, what problems you have so I understand and can help you further.

I also see that you use an old OiMS driver. In the email, you got when you purchased Oi4FS, there also where a download link to the latest OiMS driver version, v1.4.

It looks to me that you have now downloaded and installed the latest OiMS driver version.

In the same email, I also informed that if you use an older version of MCP, i.e. MCPv2, you should request an update for it.

Thanks for your answer. I updated all my first post, with new videos.

I just noticed the driver, I will try.

I tryed with the last driver, same not working.
Can you send me please the update for the MCP ?

The latest fix for MCP is sent to you.

Sorry, I still do not understand what is not working for you.

Hi Roar,

I still got troubles with the ADF rotators.
The Display (Digits) are well corresponding with the Sim. If I dial in the Sim, its showing on the Modul.
But neither the rotaries nor the ADF/ANT are working. Also no Adf/Ant is shown on the Display.
Any hint?

Will you implement the Audio L Modul?
I can configer in the Oi4FS, but it doesnt work in and way.

Tried to modify the Sioc Script by adding the OC Audio Script.
But it didn‘t work, too.

Br
Chris

mvr1918 wrote:The latest fix for MCP is sent to you.

Sorry, I still do not understand what is not working for you.

I tied with your "special MCP update" but nothing work.

All the material not working, if I use it with Xplane it work.
After all your tutorial my OC stuff is like that :
https://prnt.sc/wz9nx2
I can't do nothing on MCP, EFIS or ATC...

Did you see my 2 last video with vocal explaination ?
Did I do something wrong during the turorial ?

Ketadone wrote:
Video on default G1000 :
PART 1: https://streamable.com/disruf
PArt 2: https://streamable.com/rxm5je