www.flightsim4fun.com - rksoftware

The issue with the OVH's transfer switches ++ is now corrected in the latest OCPNGXu driver(v5.0.2)

See topic http://www.flightsim4fun.com/Forum/view ... f=24&t=918 for more info

I have a similar problem with the gear lever, ie When going to lift the gear the red lights come ON but the gear stays down.
I thing PMDG did a small update recently, and just wondering if they did something at that time.
Same for the chrono’s, Roar fixed that quickly, but it after the upgrade I’m back with them not working again.
I’m going to double check I have everything configured correctly, just in case

On another point entirely I for the standby AI and ADF, with these not being undock able in P3D4.5, can you suggest

Apologises for the cut off post!

Can anyone suggest what to use, for the undockable gauges in P3D4 for the Attitude Indicator and ADF?

Best regards to all

Don

Hi
Still the same problems with power transfers as well as gears. Most of the time one have to try many times before switches works and gear up works sometimes.
Down and to off positions no problems.

These are my installed drivers.
Sioc_703B2
OCP4NGX.exe 4.4.4.0 16 ‎december ‎2019
OC4BAv5.exe 5.0.0.0 10 ‎november ‎2019
OCP4NGXu.exe 5.0.2.0 ‎17 ‎december ‎2019
OCP4NGX_v4.6 Scriped
Have repared P3D, reinstalled PMDG, couple of times removed SIOC and OC4BAv5 Setup, delited my old OC4Bav4. Everything runs in admin config.
Everything works perfect with NGX.
Need help in order to solve the problem.

Brgds Thommy

Hi,
is there a solution for the gear problem? When i retract the gear, the front gear retract complete but the main gear begins to retract
and then extends again.
But from time to time it usually does not work.
I think I have the latest driver .

P3Dv4
PMDG737NGXu
Sioc_703B2
OCP4NGXu.exe 5.0.2.0 17 december 2019.
Any idea?

best regards Uwe

Uwe,
Send me an email to roarkrsp@gmail.com and I send you latest version of OC4BAv5