Page 2 of 2
Re: Encoder and button problem in P3Dv4.3
Posted: Sun Jul 22, 2018 8:29 am
by mvr1918
"When you monitor a variable connected to one of the faulty buttons in SIOC/IOCPConsole, do you see any reactions when activating the button?"
Yes, when turning the encoders or pressing a button, the associated fields in the monitor turn green and white when released.
You are using SIOC/SIOCMonitor not SIOC/IOCPConsole. It should be used when you using PMDG in P3D
What is the number you get in SIOC Monitor for one of the non-functioning buttons and the name of the button?
I'm sorry, I don't understand what you mean.
I mean the number of the field in the SIOCMonitor that gets green when a button is pressed and white when released. I need both number and name of button
Re: Encoder and button problem in P3Dv4.3
Posted: Sun Jul 22, 2018 12:35 pm
by Skino
Cpt EFIS not working Button: POS field 33
Consola ON/OF:
Received "PING33" from 192.168.1.5 on port 8092
Received "ED:33:33,0;" from 192.168.1.5 on port 8092
Received "SIOC - MAIN SYSTEM - Ver 5.1 B2 #5676" from 192.168.1.5 on port 8092
POS in IOPC console:
I have not found a suitable variable. But none of the variables change when I press POS.
MCP not working Rotary: Course left -> field 4 and 5
Consola ON/OF:
Received "PING31" from 192.168.1.5 on port 8092
Received "ED:31:4,1;" from 192.168.1.5 on port 8092
Received "ED:31:5,1;" from 192.168.1.5 on port 8092
Received "ED:31:4,0;" from 192.168.1.5 on port 8092
Received "ED:31:5,0;" from 192.168.1.5 on port 8092
Received "ED:31:4,1;" from 192.168.1.5 on port 8092
Received "ED:31:5,1;" from 192.168.1.5 on port 8092
Received "ED:31:4,0;" from 192.168.1.5 on port 8092
Received "SIOC - MAIN SYSTEM - Ver 5.1 B2 #5676" from 192.168.1.5 on port 8092
Course left in IOPC console:
255 Rotary_CHRSL no change
253 t_rot_CL Value changes during rotation
254 tempCL Value changes during rotation (t_rot_CL value -1)
IAS (263,64,265) similar to Cours left rotary
Re: Encoder and button problem in P3Dv4.3
Posted: Sun Jul 22, 2018 10:18 pm
by mvr1918
Not sure you have done this:
Navigate to P3D’s redist/Interface/FSX-SP2-XPACK/retail/lib and run SimConnect.msi
Re: Encoder and button problem in P3Dv4.3
Posted: Mon Jul 30, 2018 2:45 pm
by Skino
Problem solved.
I had SIOC -as usual- installed in C:\Programme(x86). However, a Win 10 update has changed the access rights of this folder. I have manually changed the rights to "full access" and everything is already running without errors.
Thanks again for your efforts.
Re: Encoder and button problem in P3Dv4.3
Posted: Mon Jul 30, 2018 8:06 pm
by mvr1918
Glad it works for you. AS stated in the OC4BAv4 documentation avoid installing programs to C:\Program Files and C:\Program Files(86) as it will get you into all kinds of trouble.