Crash

[scottb]

Hi,

I have just updated to the latest version and the program is crashing I updated because the program kept crashing but updating has not made any difference I am certain I have installed all the files in the correct places and followed all the instructions but still not working any help would be great.

Regards

Scott

[mvr1918]

Hi Scott,

Sorry you have problems.

In order for me to find out why OC4NGX is crashing I must have some information.

Send me the following info:
0. Text of your configured 737sioc.ini and sioc.ini files
1. Complete folder path of FSX and SIOC.
2. An image or a list of all installed files and folders in SIOC.
3. A crash info message
4. Text of OC.log file in SIOC folder
5. What types of flightsim gear you have connected to your PC( all types, OC and others)
6. Info about what happens if you start OC4NGX.exe directly from SIOC without first starting FSX and SIOC
7. An image of SIOC main window after your start SIOC.exe from SIOC folder
8. Windows version

[scottb]

0,
[SIOC]
IOCP_port=8092
IOCP_timeout=4000
Minimized=Yes
toggle_delay=20
[IOCARDS MODULE]
IOCard_disable=No
IOCard_LPT=No
[FSUIPC MODULE]
FSUipcdisable=No
FSUipcRefresh=60
[IOCP CLIENTS MODULES]
IOCPini_delay= 3000
IOCPclient0_disable=no
IOCPclient0_host=localhost
IOCPclient0_port=8099
IOCPclient1_disable=yes
IOCPclient1_host=localhost
IOCPclient1_port=8092
[SOUND MODULE]
Sound_disable=Yes
Volume=100
[*]
CONFIG_FILE=OCP4NGX_PP_v1.2.ssi
MASTER=7,7,1,1

1,
E:/FSX
E:/SIOC

2,
here is a link to my dropbox with my SIOC folder https://www.dropbox.com/sh/a1s1f54vm11a ... y4AIa?dl=0

3,
Faulting application name: OCP4NGX.exe, version: 2.4.3.0, time stamp: 0x54004492
Faulting module name: OCP4NGX.exe, version: 2.4.3.0, time stamp: 0x54004492
Exception code: 0xc0000005
Fault offset: 0x0000ce16
Faulting process id: 0x12a4
Faulting application start time: 0x01d0496c998a721a
Faulting application path: E:\SIOC\OCP4NGX.exe
Faulting module path: E:\SIOC\OCP4NGX.exe
Report Id: d7d104f4-b55f-11e4-88ca-e6b792de7afc

4,
OC 1.0 Sun Feb 15 23:19:17 2015

23:19:17 Initialisation ...

23:19:17 Connecting to SIOC ...
23:19:17 Timed asynchronous connection attempt started...
23:19:17 Link established to SIOC server, HostAddress:127.0.0.1, port:8092
23:19:17 Winsock ready for write
23:19:17 Registering needed Control Vars at SIOC Server ...
23:19:18 Winsock closed
23:19:18 *** WARNING?: SIOC disappeared
23:19:18 *** log file being closed

5,
OC EFIS, CP Flight MCP, Saitek Pro Yoke, Rudder pedals, Throttle quadrant, Radio Stack

6,
Loads then freezes then closes with no windows errors

7,

Untitled.jpg (105.27 KiB) Viewed 4776 times

8,Windows 7 Ultimate X64

[mvr1918]

Hi,

Faulting application name: OCP4NGX.exe, version: 2.4.3.0, time stamp: 0x54004492


This is not the latest driver, it should be 2.4.8

Can you check that you are using the right one. ( rightclick OCP4NGX.exe and check details)

[scottb]

Have just checked the file in SIOC folder and is running 2.4.8

[mvr1918]

Hi,

Do not remember if you have tried to tun OCP4NGX.exe without the CP Flight MCP connected to your PC. Disable also the software for it before trying OCP4NGX.

If not, try it to see if it is conflicting with OC4PNGX.

Try to run OCP4NGX.exe without the EFIS connected to PC. Does it still crash?

Also check that you have the
Microsoft .NET Framework 4.5
Microsoft Visual C++ 2010 Redistributable (X86)

installed.

I also have a pure EFIS script you can try



https://onedrive.live.com/redir?resid=C ... lder%2cssi


Unzip to SIOC folder
Run OC4BAConfig and configure new sioc.ini with this new script
Run SIOC.exe
Run OCP4NGX.exe

Check if crashing or not.

[scottb]

Have tried all of the above and no change I am not even showing any errors in the event viewer

[mvr1918]

hi


Not sure you have done tested this before.

Do the EFIS module work alone with SIOC.exe?

Start SIOC.exe ( with the OCP4NGX_EFIS1.ssi)
Go to IOCPConsole within SIOC main window
Turn on LOG ON
Test that all buttons functions by checking the LOG window.

[scottb]

Have just tried it and nothing happens

[mvr1918]

It looks like your EFIS is not working as it should. If you have done this correctly.


Download and test EFIS with OpenCockpits software. If not working you have a faulty EFIS.


Go to Opencockpits web site and under EFIS module you find the

Installation and user's manual (includes all necessary files to use).

Run the Test within this package.