mcp lights problem (SOLVED)
mcp lights problem (SOLVED)
I have install OC4BA V3 and OCP4NGX_PP_V1.1.ssi, but MCP lights are off.I push on C/O button but still off, however all the buttons and switches MCP work`s correctly. Can you help me?
Re: mcp lights problem
I return to OC4BA V 2.46/2.47.I tried with both versions, but it's the same, MCP lights are off and all the buttons and switches work's. What'sthe matter?
Re: mcp lights problem
Please specify which version you are running, both driver and script.I return to OC4BA V 2.46/2.47.I tried with both versions, but it's the same, MCP lights are off and all the buttons and switches work's. What'sthe matter?
Check with IOCPConsole in SIOC to see if the CO button works on your hardware. Set Log ON and send me a copy of the Log after you push CO.
Re: mcp lights problem
I tried, first with OC4BA V 2.47 and OCP4NX_PP_V1.2.ssi; after with OC4BA V 2.46 and OCP4NX_PP_V1.2.ssi.
Image file is accompanied
Image file is accompanied
- Attachments
-
- 1.png (182.43 KiB) Viewed 3750 times
Re: mcp lights problem
Hi
With the OCP4NGX 246 or OCP4NGX 247 there should be no need to push CO at start to initiate SDK transmission. Your MCP displays should light up if you Starts FSX, select a NGX plane and then start OCP4NGX via OC4BA.
chech state of SIOC var 2800, if it is set to 1 the transmission of SDK data to MCP display should be active. If set to 0, try toogling it in IOCPConsole and see what's happening.
I haven't got any reports that others have this problem
you could also try to go to SIOC folder, start SIOC.exe and then start OCP4NGX.exe after 10 sec to see if things are OK
Looking at your IOCPConsile LOg file you sent, I also see that the EL_STATE is 0. this indicates that the NGX is powered OFF.
With the OCP4NGX 246 or OCP4NGX 247 there should be no need to push CO at start to initiate SDK transmission. Your MCP displays should light up if you Starts FSX, select a NGX plane and then start OCP4NGX via OC4BA.
chech state of SIOC var 2800, if it is set to 1 the transmission of SDK data to MCP display should be active. If set to 0, try toogling it in IOCPConsole and see what's happening.
I haven't got any reports that others have this problem
you could also try to go to SIOC folder, start SIOC.exe and then start OCP4NGX.exe after 10 sec to see if things are OK
Looking at your IOCPConsile LOg file you sent, I also see that the EL_STATE is 0. this indicates that the NGX is powered OFF.
Re: mcp lights problem
Answers:
1) SIOC var 2800=1
2)IOCPconsole LOG ON EL_STATE=0, because I had not started FSX when I did the picture.
3) If I start SIOC.exe and then start OCP4NGX.exe after 10 sec, all lights on=0, if FSX not started. If FSX starte all lights off.
I think that the issue is the software.Can you help me? Thanks
1) SIOC var 2800=1
2)IOCPconsole LOG ON EL_STATE=0, because I had not started FSX when I did the picture.
3) If I start SIOC.exe and then start OCP4NGX.exe after 10 sec, all lights on=0, if FSX not started. If FSX starte all lights off.
I think that the issue is the software.Can you help me? Thanks
Re: mcp lights problem
I solved the problem. Reviewing the installation instructions I've noticed that for some strange reason options.ini, PMDG aircraft [SDK]
EnableDataBroadcast=1 had disappeared.Thank you very much
EnableDataBroadcast=1 had disappeared.Thank you very much