OCP4WGX CRASH

[Cristobal]

ocp4ngx sometimes have a crash, I just happen to connect the mcp and sometimes already in flight, sometimes happen very often and other flight lasts almost all good.

Thanks in advance.

[mvr1918]

Hi,

Could you tell me which version of OCP4NGX.exe, SIOC.exe and OCP4NGX script you are running when you see these crashes.

I also need to know which OC modules you have connected to the PC.



/Roar

[Cristobal]

Hi,
this is my configuration:

SIOC 4.6B1
ocp4ngx_v2.3
script ocp4ngx_v2.2.ssi
MCP and EFIS connected with USBexpansion, no modules.

If you remember i have another post where my MCP not working.
This was resolved changing the old PIC of my USBExpansion by a new version.

I do not know if the following may be relevant:

When I bought the new pic in OpenCopicks they asked me what was the clock speed of my cards that had two versions, 6MHz and 20MHz.

My cards are 6MHz (year 2006)

Thanks in avanced.

Cristóbal.

[mvr1918]

Hi,

Could you do me a favour and reload the "old" OCP4NGX.exe driver to your SIOC folder and try flying and see if you have these crashes with that version.

And also, do you see a pattern in the crashes? Can you reproduce the crash by means of any specific switch/knob pushing or does it just happens randomly?

Are you getting any fault message that can help me trace it down.

/Roar

[Cristobal]

I installed the old version and fly without incident, everything works fine with OCP4NGX.EXE V2.2.

The crash with V2.3 occurred without any pattern, sometimes 2 or 3 for a flight ... other more .. the message displayed is "OCP4NG ha dejado de funcionar", touch or not touched any switch/knob.

I can fly with version 2.2.

thanks for your technical support is really fast and efficient.

Cristóbal.