ATC selector switch not working [Solved]

This is the forum for all your MSFS 2020 - PMDG 777 driver questions and issues
Post Reply
User avatar
Mladen
Posts: 26
Joined: Tue Jan 06, 2015 5:25 pm
Location: EHSE

ATC selector switch not working [Solved]

Post by Mladen »

Unfortunately ATC Selector Switch is not working.
Both rotary knobs for tuning the Squawk code are working OK.

This is mu SDK setting in 777_Options.ini

[SDK]
EnableDataBroadcast=1
EnableCDUBroadcast.0=1
EnableCDUBroadcast.1=1
EnableCDUBroadcast.2=1

How should I solve this "problem"?

Thanks

Gr, Mladen
mvr1918
Site Admin
Posts: 1703
Joined: Thu Aug 30, 2012 3:35 pm

Re: ATC selector switch not working

Post by mvr1918 »

The ATC Mode knob is not working due to issues in the PMDG 777 SDK.

The issue has been reported to PMDG and must be fixed by them.

An updated PMDG 777 driver will be sent out to all users when it is fixed.
mvr1918
Site Admin
Posts: 1703
Joined: Thu Aug 30, 2012 3:35 pm

Re: ATC selector switch not working

Post by mvr1918 »

The ATC Mode selector issue, has been solved and is working in latest version of the 777 driver ans script.
Hans K
Posts: 16
Joined: Mon Apr 27, 2020 9:37 am
Location: EHRD

Re: ATC selector switch not working [Solved]

Post by Hans K »

Hi Roar,

The latest driver version I have received and installed is version 1.1 and unfortunately the ATC mode switch doesn't still work.

Regards,
Hans
mvr1918
Site Admin
Posts: 1703
Joined: Thu Aug 30, 2012 3:35 pm

Re: ATC selector switch not working [Solved]

Post by mvr1918 »

Are you using the latest 1.2 script?
User avatar
Mladen
Posts: 26
Joined: Tue Jan 06, 2015 5:25 pm
Location: EHSE

Re: ATC selector switch not working [Solved]

Post by Mladen »

I can confirm that ATC selector switch is not operational. While selecting different Modes on OC ATC module the selector knob in the VC (Virtual Cockpit) is moving but no signal is sent to ND (Navigation Display) or Pilot clients on vPilot or IVAO Altitude.
I use 1.2 driver
Gr, Mladen
Hans K
Posts: 16
Joined: Mon Apr 27, 2020 9:37 am
Location: EHRD

Re: ATC selector switch not working [Solved]

Post by Hans K »

Hi Roar,

I can confirm the observations of Mladen: knob is moving in the VC but no further action. By the way, I am using script version 1.2.

Greetings,
Hans
mvr1918
Site Admin
Posts: 1703
Joined: Thu Aug 30, 2012 3:35 pm

Re: ATC selector switch not working [Solved]

Post by mvr1918 »

I will check it out and fix it (if possible) when I am back where I have my Opencockpits modules.
Post Reply