A/P and A/T reset bug[SOLVED]

[gblair]

Hi Roar,

I found a possible bug. The A/P and A/T indicators and push to reset switches on the AFDS do not work. The FMC P/RST does work.

If I use the test light switch then the indicators do illuminate. If I use the Test 1/2 on the AFDS then only FMC P/RST illuminates.

Its not a hardware problem as everything works in P3D


Regards,
Gordon

[gblair]

Anyone else confirm this ?

Gordon

[schwarzfr]

Yes - confirmed - have exactly the same issue - will hopefully be corrected in the next updated version.

Frank

[mvr1918]

Just tested this LEDS and buttons with script 5.5 and it works OK here.

GO to IOCPConsole and dosome testing and give more information if you still have the problem

[gblair]

I have been away for a while, but was now able to check this again

I am using script 5.5

Everything working correctly in P3D

Checked with SIOC Monitor and all switch inputs from the AFDS are detected

Can enable the different Red/Green LED's in the switches from SIOC Monitor

As stated previously, all lights also illuminate when clicking the "Test Lights" switch in the SIM, but they do not illuminate when using the test 1/2 switch on the AFDS itself

Gordon

[mvr1918]

I add this to the list over issues that need to be fixed in the PMSG 737 for MSFS driver and script.

[gblair]

https://forum.pmdg.com/forum/main-forum ... ot-working

[mvr1918]

I have not tested this, if it now works or not as I do not have the home cockpit up and running.
Fine, if someone could give a status report on this issue now after the latest PMDG driver code has been updated and the PMDG airplane has also gone through several updates since this issue was reported.

[hermann2441]

The A/P and A/T knobs are working now, but the lamps still do not.
But the FMC lamp and the knob are both working!
Some people I asked about told me, that we have to wait for the SDK from PMDG.

Rgds Hermann

[mvr1918]

I have reported this in a Ticket to the PMDG development team and their are looking into it and hopefully it will be corrected when the SDK is officially released.