Airbus Radio on CJ4 (and not only)

[oal163]

Hi,
It's been a while I'm trying to make the Airbus Radio module working on MSFS with CJ4 but I can not.
I have seen another post from ZillaUK where he explain how he made it but I can not.
Lately I tried a script from Roar specofoc for CJ4 and there was a good progress but still not there.
When I used the script from Roar the COM1 and COM2 works fine, the ADF works fine but the NAV on MSFS CJ4 keeps changing values between the one I put through the module and another freq 117.5. Do be more specific, I put a frequency (112,2 for example) on the radio module and I press the swap button. The frequency ques to active in the module but in the CJ4 the value changes between the one I add and another frequency 117,5, which I can not understand how this frequency is coming up.
Any help?
Thank you in advance
Spyros

[mvr1918]

If you active LOG ON in IOCPConsole before you change the NAV1 and hit TRF and copy the activities and show it here, I can have a look at it.

[oal163]

Hi,

I was out so I couldn't test what you suggested.

Today I managed to run the test and below you can see all the steps I took.

I started MSFS2020 and I loaded the CJ4 dark and cold. I started the engines and I went to the tune page of FMS.

Then I loaded the IOCModules, I run the OiMS v1.5, I loaded the SIOC application and as a final step I logged into the IOCP console.

Then on the airbus radio module I pressed the NAV button and then the frequency 109.00 followed by the swap button .

The frequency begun to change from 117.5 to 109.00.

Screenshots from IOCP Console attached

I remain availbale

Spiridon

[mvr1918]

Then I loaded the IOCModules, I run the OiMS v1.5, I loaded the SIOC application and as a final step I logged into the IOCP console.

Do not run IOCModules, just click the CJi image to start up SIOC and the OiMSCJ4 driver.

[oal163]

Hi,

if I do not run the IOCModule.exe the panel stays always dark.

The module lights up only when I run the IOCmodule

Any idea why ?

[oal163]

and trying to help I attach the main and the setup screen of SIOC

[mvr1918]

What is the text in the FS_MS_CJ4.ini?

[oal163]

[SIOC]
IOCP_port=8092
IOCP_timeout=4000
Minimized=Yes
toggle_delay=20
[IOCARDS MODULE]
IOCard_disable=No
IOCard_LPT=No
[FSUIPC MODULE]
FSUipcdisable=No
FSUipcRefresh=60
[IOCP CLIENTS MODULES]
IOCPini_delay=3000
IOCPclient0_disable=no
IOCPclient0_host=localhost
IOCPclient0_port=8099
IOCPclient1_disable=yes
IOCPclient1_host=localhost
IOCPclient1_port=8092
[SOUND MODULE]
Sound_disable=Yes
Volume=100
[*]
[FS_MS CJ4]
CONFIG_FILE=Oi4FS-MS CJ4 v1.0-R.ssi
MASTER=12,12,1,92

[mvr1918]

Looks OK.

Start up the driver by clicking the CJ4 image in Oi4FS. What is the SIOC Device window showing?

[oal163]

The display below