No Options.ini file? (Solved)
No Options.ini file? (Solved)
Hi Roar, my PMDG 737NGXu does not have an \PMDG\PMDG 737 NGXu\737NGXu_Options.ini file? Is that correct?
- Attachments
-
- IMG_4193.JPG (106.18 KiB) Viewed 4315 times
Last edited by Wardie on Thu Nov 21, 2019 3:54 pm, edited 2 times in total.
Re: No Options.ini file?
You are not the only one having this issue.
I have asked about this in the PMDG forum and the answer I got was that the file is created after or during the first flight of the NGXu.
Have you had any flights( started P3Dv4 and selected an NGXu and test flying it) yet?
If yes, and still no file. Where is P3Dv4 installed? Full folder path?
I have asked about this in the PMDG forum and the answer I got was that the file is created after or during the first flight of the NGXu.
Have you had any flights( started P3Dv4 and selected an NGXu and test flying it) yet?
If yes, and still no file. Where is P3Dv4 installed? Full folder path?
Re: No Options.ini file?
Yes, that screenshot was after I've done a few flights and f:\Prepar3dv4 is the folder........
Re: No Options.ini file?
Just "deleted" my Options.ini and took a test flight. It didn't created the file . So the answer from PMDG is wrong.
here is content of my file, open notepad and create a 737NGXu:Options.ini with this text and save to correct folder. Save it as an ini file, not txt file.
Test now.
...........
IRS]
IRS_QuickAlign=1
IRS_UseLastPos=1
[Pushback]
PushbackUnitsFeet=1
PushbackCommsType=0
[AFS]
ThrottleATOverride=0
HighIdleFlare=0
AutotuneOBSinLOC=1
AP_EngageRealistic=1
DisableCtrlInput=0
[UserOptions]
FOCalloutV1=1
FOCalloutVR=1
FOCalloutV2=1
PauseAtTOD=0
MaxAutoTimeCompression=2
CHRbuttonForAutoTimeCompression=1
SyncAltimeters=1
SyncStbyAltimeters=1
SyncMinimums=1
ShowThrustLeverPosition=0
ShowPilots=1
HideSeat L=0
HideSeat R=0
HideYoke L=1
HideYoke R=0
LoweredYokesMove=0
ServiceBasedFailures=0
EngineOilUseLast=0
TABforCDUinput=1
DisablePopupDU=0
HGSEyepointAdjust=1
EyepointAdjust=1
EnableCockpitShaking.0=1
EnableCockpitShaking.1=1
EnableCockpitShaking.2=1
EnableCockpitShaking.3=1
EnableCockpitShaking.4=1
EnableCockpitShaking.5=1
EnableCockpitShaking.6=1
EnableCockpitShaking.7=1
EnableCockpitShaking.8=1
EnableCockpitShaking.9=1
GroundObjectsGlobalShow=0
ShowGroundObject.0=1
ShowGroundObject.1=1
ShowGroundObject.2=1
ShowGroundObject.3=1
ShowGroundObject.4=1
ShowGroundObject.5=1
ShowGroundObject.6=1
ShowGroundObject.7=1
ShowGroundObject.8=1
ShowGroundObject.9=1
ShowGroundObject.10=1
ShowGroundObject.11=1
ShowGroundObject.12=1
ShowGroundObject.13=1
ShowGroundObject.14=1
ShowGroundObject.15=1
ShowGroundObject.16=1
ShowGroundObject.17=1
ShowGroundObject.18=1
ShowGroundObject.19=1
ShowGroundObject.20=1
ShowGroundObject.21=1
ShowGroundObject.22=1
ShowGroundObject.23=1
ShowGroundObject.24=1
ShowGroundObject.25=1
ShowGroundObject.26=1
AnimateGroundConnections=1
Enable Tiller Steering=0
CreatePlnFile=0
AltnsInPln=0
[SimCenter]
EnableOperations=0
[PerformanceOptions]
FPSlimit_PFD_EFIS_2D=0
FPSlimit_PFD_EFIS_VC=0
FPSlimit_ND_MAP_2D=0
FPSlimit_ND_MAP_VC=0
FPSlimit_Engine_2D=15
FPSlimit_Engine_VC=15
FPSlimit_HUD_2D=25
FPSlimit_HUD_VC=25
disableSide=2
TerrImageSize=1
TerrDetailLevel=2
TerrDithered=1
TerrSweepSimulated=1
[Sound]
PlaySoundsInExtView=1
PlaySoundsInBackground=0
SoundDevice=Speakers (Realtek High Definition Audio)
SoundMasterVolume=0.50
SoundCustomEngineVolume=0.50
SoundPreloadScheme=2
SoundGroupValue.0=1.00
SoundGroupValue.1=1.00
SoundGroupValue.2=1.00
SoundGroupValue.3=1.00
SoundGroupValue.4=1.00
SoundGroupValue.5=1.00
SoundGroupValue.6=1.00
[Aircraft Config]
FixedConfig=
[Panel State]
StartupPanelState=
[SDK]
EnableDataBroadcast=1
here is content of my file, open notepad and create a 737NGXu:Options.ini with this text and save to correct folder. Save it as an ini file, not txt file.
Test now.
...........
IRS]
IRS_QuickAlign=1
IRS_UseLastPos=1
[Pushback]
PushbackUnitsFeet=1
PushbackCommsType=0
[AFS]
ThrottleATOverride=0
HighIdleFlare=0
AutotuneOBSinLOC=1
AP_EngageRealistic=1
DisableCtrlInput=0
[UserOptions]
FOCalloutV1=1
FOCalloutVR=1
FOCalloutV2=1
PauseAtTOD=0
MaxAutoTimeCompression=2
CHRbuttonForAutoTimeCompression=1
SyncAltimeters=1
SyncStbyAltimeters=1
SyncMinimums=1
ShowThrustLeverPosition=0
ShowPilots=1
HideSeat L=0
HideSeat R=0
HideYoke L=1
HideYoke R=0
LoweredYokesMove=0
ServiceBasedFailures=0
EngineOilUseLast=0
TABforCDUinput=1
DisablePopupDU=0
HGSEyepointAdjust=1
EyepointAdjust=1
EnableCockpitShaking.0=1
EnableCockpitShaking.1=1
EnableCockpitShaking.2=1
EnableCockpitShaking.3=1
EnableCockpitShaking.4=1
EnableCockpitShaking.5=1
EnableCockpitShaking.6=1
EnableCockpitShaking.7=1
EnableCockpitShaking.8=1
EnableCockpitShaking.9=1
GroundObjectsGlobalShow=0
ShowGroundObject.0=1
ShowGroundObject.1=1
ShowGroundObject.2=1
ShowGroundObject.3=1
ShowGroundObject.4=1
ShowGroundObject.5=1
ShowGroundObject.6=1
ShowGroundObject.7=1
ShowGroundObject.8=1
ShowGroundObject.9=1
ShowGroundObject.10=1
ShowGroundObject.11=1
ShowGroundObject.12=1
ShowGroundObject.13=1
ShowGroundObject.14=1
ShowGroundObject.15=1
ShowGroundObject.16=1
ShowGroundObject.17=1
ShowGroundObject.18=1
ShowGroundObject.19=1
ShowGroundObject.20=1
ShowGroundObject.21=1
ShowGroundObject.22=1
ShowGroundObject.23=1
ShowGroundObject.24=1
ShowGroundObject.25=1
ShowGroundObject.26=1
AnimateGroundConnections=1
Enable Tiller Steering=0
CreatePlnFile=0
AltnsInPln=0
[SimCenter]
EnableOperations=0
[PerformanceOptions]
FPSlimit_PFD_EFIS_2D=0
FPSlimit_PFD_EFIS_VC=0
FPSlimit_ND_MAP_2D=0
FPSlimit_ND_MAP_VC=0
FPSlimit_Engine_2D=15
FPSlimit_Engine_VC=15
FPSlimit_HUD_2D=25
FPSlimit_HUD_VC=25
disableSide=2
TerrImageSize=1
TerrDetailLevel=2
TerrDithered=1
TerrSweepSimulated=1
[Sound]
PlaySoundsInExtView=1
PlaySoundsInBackground=0
SoundDevice=Speakers (Realtek High Definition Audio)
SoundMasterVolume=0.50
SoundCustomEngineVolume=0.50
SoundPreloadScheme=2
SoundGroupValue.0=1.00
SoundGroupValue.1=1.00
SoundGroupValue.2=1.00
SoundGroupValue.3=1.00
SoundGroupValue.4=1.00
SoundGroupValue.5=1.00
SoundGroupValue.6=1.00
[Aircraft Config]
FixedConfig=
[Panel State]
StartupPanelState=
[SDK]
EnableDataBroadcast=1
Re: No Options.ini file?
I've done that but now my yoke and rudders do not work, they are "seen" in the calibration page but do not work.......
Re: No Options.ini file?
Report issue to PMDG via a support ticket.
It is not an OC4BAv5 issue, but an NGXu issue.
It is not an OC4BAv5 issue, but an NGXu issue.
Re: No Options.ini file?
Will do! Thanks for your help as always.
Re: No Options.ini file?
Also try to make change in the FMS Options file.
I believe it is created after the first change.
I believe it is created after the first change.
Re: No Options.ini file?
For me it was the same. No file. I created the file manually and added the setting. Then after changing options with fmc the file was updated with all the settings.
Re: No Options.ini file?
Hi Twisted8, thanks for that, I did as you suggested and I now have an options.ini file! The only problem now is that although all my controls are picked up and calibrate perfectly, my CH rudder pedals and Saitek yoke no longer work........ any ideas?