Hi,
I installed OC4BAv4 and OCP4787 and on the initial install my OC MCPv3 worked perfectly, however the next day I booted the computer and P3dv4 and since I have not been able to run the MCP'
My P3dv4 is installed to D:\Prepar3d v4
My SIOC Dir is D:\SIOC
I have screen capped the information that may be needed to investigate the issue..
Thanks for any help,
Brian
Need a little advice please.
Need a little advice please.
- Attachments
-
- 2-12-2018 8-23-05 AM.png (27.1 KiB) Viewed 5830 times
-
- 2-12-2018 8-14-24 AM.png (57.46 KiB) Viewed 5830 times
-
- 2-12-2018 8-13-17 AM.png (27.96 KiB) Viewed 5830 times
Re: Need a little advice please.
Everything looks fine.
I suspect that Window OS has been updated to Fall Edition 1809.
SIOC v6 do not work with Windows OS 1809.
Opencockpits is working on a fix. Hopefully they will soon release an update.
Pls check Windows version.
If the issue is caused by the updated Windows version, you have to either roll back Windows or wait for the an updated SIOC.exe
I suspect that Window OS has been updated to Fall Edition 1809.
SIOC v6 do not work with Windows OS 1809.
Opencockpits is working on a fix. Hopefully they will soon release an update.
Pls check Windows version.
If the issue is caused by the updated Windows version, you have to either roll back Windows or wait for the an updated SIOC.exe
Re: Need a little advice please.
A new updated SIOC v7 that works with Windows OS 1809 can now be downloaded from http://www.opencockpits.com/catalog/inf ... anguage=en
Re: Need a little advice please.
Hi,
I would like to have some information please. Yesterday I did purchase the OCP4787 driver, but did not receive a downloadlink, for it might have been sent to a wrong email-address. Is it possible toe change that?
The second question is, can I use my FMC v3 with it, for that is the only hardware of OC I have at this moment. My MCP is the VR-Insight MCP-combo, so, that will not work.
The third, and final, question is, do I need OC4BAv4_Max to get the OCP4787 working, or can I still use the OC4BAv4?
Please, send me an email if there is a solution.
Kind regards,
Stefan, mrfsnvangoch@gmx.de
I would like to have some information please. Yesterday I did purchase the OCP4787 driver, but did not receive a downloadlink, for it might have been sent to a wrong email-address. Is it possible toe change that?
The second question is, can I use my FMC v3 with it, for that is the only hardware of OC I have at this moment. My MCP is the VR-Insight MCP-combo, so, that will not work.
The third, and final, question is, do I need OC4BAv4_Max to get the OCP4787 working, or can I still use the OC4BAv4?
Please, send me an email if there is a solution.
Kind regards,
Stefan, mrfsnvangoch@gmx.de
Re: Need a little advice please.
The download link was sent to the
email address that was used in the PayPal
payment you did.
As stated in the OC4787 order info
only MCP and EFIS are supported now. Hopefully, FMC will come later, but I need more info from Qualitywings.
OC4BAV4 is OK.
email address that was used in the PayPal
payment you did.
As stated in the OC4787 order info
only MCP and EFIS are supported now. Hopefully, FMC will come later, but I need more info from Qualitywings.
OC4BAV4 is OK.
Re: Need a little advice please.
Hi,
Unfortunately I do not have access to that address anymore. I tried everything, but nothing works. Recovery tells me "insufficient data entered".
Hopefully we can figure out something.
Sincerely yours,
Stefan.
Unfortunately I do not have access to that address anymore. I tried everything, but nothing works. Recovery tells me "insufficient data entered".
Hopefully we can figure out something.
Sincerely yours,
Stefan.
Re: Need a little advice please.
Send me an email to roarkrsp@gmail.com so I get your email address that you use now.
I will send you a download link when I get your email address.
I will send you a download link when I get your email address.