B777 cockpit from scratch

[Capt777]

Hi SimFlyers.

Anybody here trying to build a B777 with own hardware?
Not much documentation about this issue.
Hispa Panels has real 777 panels.
Who wants to fly the T7 with 737 gauges?

// Capt777

[Capt777]

This post might be in the wrong place.
Roar, can u move it to the right tread!

// Capt777

[Capt777]

Some clarification.

I have OC4BAv4 and OCP4777X
All Open Cockpit IOCards necessary.
All components from Open Cockpit.
No P&P
Panels (MCP and EFIS) from HispaPanels for the 777.
Now I have problem to assemble my desktop cockpit.
7segments show the right numbers.
But the rotary will not cooperate att all.
Someone here that is Not a Plug and Play pilot?
My Best // Capt777

[mvr1918]

Did you check your rotatary with SIOC /SIOC Monitor to see that it is correct.

If you have connected it to e.g. input 0 and 1 , you should see input 0 and 1 values change like this 0-0 1-0 1-1 0-1 0-0 as you turn the rotary.

If that is correct the next step is to verify that the IAS rotary statement in the script is using input 0 or modify the script so that the IAS rotary statement in the script is using input 0.


The next thing to do is to check in IOCPConsole with LOG ON

[Capt777]

Thx Roar for your fast reply.

My cards behave very strange.
Might be faulty cards?

Thought I should ask on Open Cockpit Forum how to determent
wich card that could be faulty. USBExpantion or the Mastercard.

But alas! Spammers taking over OC Forum completly?

Sending u a PM Roar.

Best // Capt777

[mvr1918]

The user forum at Opencockpits.com is a user- user forum and will probably not give you any answers.

Send your questions to support@opencockpits.com

[Capt777]

I did, 4 days ago.
// Capt777