Audio modules will not work

[veelo]

Hi Roark,

Have installed as stated before OC4BAv4 and when starting from desktop everything works dandy except for the audio modules. A) the script sees only 1 module but there are two coupled. B) But even one I cannot get working. Backlight is there, so power is there. Audio 1 is seen by the software but will not work.
Please advise,
Pieter Veelo

[mvr1918]

send an image of the SIOC.exe main window and the OC4BAv4/Config window.

I need to see what is detected by SIOC.exe and OC4BAv4/Config in order to help you.

[veelo]

Hi Roark,

Hope I understood what you wanted. But you are welcome via Teamviewer

Pieter

[mvr1918]

I can only see 1 AUDIO module detected in the SIOC window and 1 in OC4BAv4/Config.


Are you sure you have 2 Audio modules connected?

[veelo]

Hi Roark,

Yes I,m sure. They are connected by two flat cables (sorry I don't know the correct name for them) and one of them has the power (5 volt) and USB socket. On the box it says ÄUDIO BOEING 737 SET P&P
But even when you say you see one, none is working

Pieter

[Alpin-Flier]

Hi Pieter

You have selected OCP4NGX_PP_v4.0.ssi as script. As far as I can see, there is no audio definition inside. The only script I have found with audio definition is OCP4NGX_v4.4OC. But this script does not use the PP interface. So I had to adapt it. See the following script part and insert it into your script. Let us know if it works.

// Audio Pedestal

Var 1450, name micsel_l, static, LINK Subrutine // COMM_SelectedMic[0]
{
IF &COM2_Power_ON > 0
{
IF &micsel_l = 0
{
&AU1VH1MI = 1
&AU1VH2MI = 0
}
IF &micsel_l = 1
{
&AU1VH2MI = 1
&AU1VH1MI = 0
}
}
ELSE
{
&AU1VH2MI = 0
&AU1VH1MI = 0
}
}

Var 1451, name micsel_r, static, LINK Subrutine // COMM_SelectedMic[1]
{
IF &COM2_Power_ON > 0
{
IF &micsel_r = 0
{
&AU2VH1MI = 1
&AU2VH2MI = 0
}
IF &micsel_r = 1
{
&AU2VH2MI = 1
&AU2VH1MI = 0
}
}
ELSE
{
&AU2VH2MI = 0
&AU2VH1MI = 0
}
}

Var 1523, name rec_l, static, LINK Subrutine // COMM_ReceiverSwitches[1]
{
IF &COM2_Power_ON > 0
{
&AU1VH1VO = TESTBIT &rec_l ,0
&AU1VH2VO = TESTBIT &rec_l ,1
&AU1NA1VO = TESTBIT &rec_l ,8
&AU1NA2VO = TESTBIT &rec_l ,9
&AU1AD1VO = TESTBIT &rec_l ,10
&AU1AD2VO = TESTBIT &rec_l ,11
&AU1MKRVO = TESTBIT &rec_l ,12
}
ELSE
{
&AU1VH1VO = 0
&AU1VH2VO = 0
&AU1NA1VO = 0
&AU1NA2VO = 0
&AU1AD1VO = 0
&AU1AD2VO = 0
&AU1MKRVO = 0
}
}

Var 1524, name rec_r, static, LINK Subrutine // COMM_ReceiverSwitches[2]
{
IF &COM2_Power_ON > 0
{
&AU2VH1VO = TESTBIT &rec_r ,0
&AU2VH2VO = TESTBIT &rec_r ,1
&AU2NA1VO = TESTBIT &rec_r ,8
&AU2NA2VO = TESTBIT &rec_r ,9
&AU2AD1VO = TESTBIT &rec_r ,10
&AU2AD2VO = TESTBIT &rec_r ,11
&AU2MKRVO = TESTBIT &rec_r ,12
}
ELSE
{
&AU2VH1VO = 0
&AU2VH2VO = 0
&AU2NA1VO = 0
&AU2NA2VO = 0
&AU2AD1VO = 0
&AU2AD2VO = 0
&AU2MKRVO = 0
}
}

Var 0784, name AU1VH1MI, Link IOCARD_OUT, Device 21, Output 0 // AUDIO1 VHF1 MIC
Var 0785, name AU1VH2MI, Link IOCARD_OUT, Device 21, Output 1 // AUDIO1 VHF2 MIC
Var 0786, name AU1VH1VO, Link IOCARD_OUT, Device 21, Output 2 // AUDIO1 VHF1 VOL
Var 0787, name AU1VH2VO, Link IOCARD_OUT, Device 21, Output 3 // AUDIO1 VHF2 VOL
Var 0788, name AU1NA1VO, Link IOCARD_OUT, Device 21, Output 4 // AUDIO1 NAV1 VOL
Var 0789, name AU1NA2VO, Link IOCARD_OUT, Device 21, Output 5 // AUDIO1 NAV2 VOL
Var 0790, name AU1AD1VO, Link IOCARD_OUT, Device 21, Output 6 // AUDIO1 ADF1 VOL
Var 0791, name AU1AD2VO, Link IOCARD_OUT, Device 21, Output 7 // AUDIO1 ADF2 VOL
Var 0792, name AU1MKRVO, Link IOCARD_OUT, Device 21, Output 8 // AUDIO1 MARKER VOL

Var 0793, name S_AU1VH1MI, Link IOCARD_SW, Device 21, Input 0 // AUDIO1 VHF1 MIC
{
IF &S_AU1VH1MI = 1
{
&AU1VH1MI_I = -1
}
ELSE
{
&AU1VH1MI_I = 0
}
}

Var 0794, name S_AU1VH2MI, Link IOCARD_SW, Device 21, Input 1 // AUDIO1 VHF2 MIC
{
IF &S_AU1VH2MI = 1
{
&AU1VH2MI_I = -1
}
ELSE
{
&AU1VH2MI_I = 0
}
}

Var 0795, name S_AU1VH1VO, Link IOCARD_SW, Device 21, Input 2 // AUDIO1 VHF1 VOL
{
IF &S_AU1VH1VO = 1
{
IF &AU1VH1VO = 0
{
&AU1VH1VO_I = 1
}
ELSE
{
&AU1VH1VO_I = 0
}
}
}

Var 0796, name S_AU1VH2VO, Link IOCARD_SW, Device 21, Input 3 // AUDIO1 VHF2 VOL
{
IF &S_AU1VH2VO = 1
{
IF &AU1VH2VO = 0
{
&AU1VH2VO_I = 1
}
ELSE
{
&AU1VH2VO_I = 0
}
}
}

Var 0797, name S_AU1NA1VO, Link IOCARD_SW, Device 21, Input 4 // AUDIO1 NAV1 VOL
{
IF &S_AU1NA1VO = 1
{
IF &AU1NA1VO = 0
{
&AU1NA1VO_I = 1
}
ELSE
{
&AU1NA1VO_I = 0
}
}
}

Var 0798, name S_AU1NA2VO, Link IOCARD_SW, Device 21, Input 5 // AUDIO1 NAV2 VOL
{
IF &S_AU1NA2VO = 1
{
IF &AU1NA2VO = 0
{
&AU1NA2VO_I = 1
}
ELSE
{
&AU1NA2VO_I = 0
}
}
}

Var 0799, name S_AU1AD1VO, Link IOCARD_SW, Device 21, Input 6 // AUDIO1 ADF1 VOL
{
IF &S_AU1AD1VO = 1
{
IF &AU1AD1VO = 0
{
&AU1AD1VO_I = 1
}
ELSE
{
&AU1AD1VO_I = 0
}
}
}

Var 0800, name S_AU1AD2VO, Link IOCARD_SW, Device 21, Input 7 // AUDIO1 ADF2 VOL
{
IF &S_AU1AD2VO = 1
{
IF &AU1AD2VO = 0
{
&AU1AD2VO_I = 1
}
ELSE
{
&AU1AD2VO_I = 0
}
}
}

Var 0801, name S_AU1MKRVO, Link IOCARD_SW, Device 21, Input 9 // AUDIO1 MARKER VOL
{
IF &S_AU1MKRVO = 1
{
IF &AU1MKRVO = 0
{
&AU1MKRVO_I = 1
}
ELSE
{
&AU1MKRVO_I = 0
}
}
}

Var 0802, name S_AU1RT, Link IOCARD_SW, Device 21, Input 12 // AUDIO1 R-T
{
IF &S_AU1RT = 1
{
&AU1RTIC_I = 0
}
ELSE
{
&AU1RTIC_I = 1
}
}

Var 0803, name S_AU1IC, Link IOCARD_SW, Device 21, Input 13 // AUDIO1 I-C
{
IF &S_AU1IC = 1
{
&AU1RTIC_I = 2
}
ELSE
{
&AU1RTIC_I = 1
}
}

Var 0804, name R_AU1FILTV, Link IOCARD_SW, Device 21, Input 11 // AUDIO1 FILTER V ROTARY
{
IF &R_AU1FILTV = 1
{
&AU1FILT_I = 1
}
ELSE
{
&AU1FILT_I = 0
}
}

Var 0805, name R_AU1FILTR, Link IOCARD_SW, Device 21, Input 10 // AUDIO1 FILTER R ROTARY
{
IF &R_AU1FILTR = 1
{
&AU1FILT_I = 2
}
ELSE
{
&AU1FILT_I = 0
}
}

Var 0806, name S_AU1ALT, Link IOCARD_SW, Device 21, Input 14 // AUDIO1 ALT-NORM
{
IF &S_AU1ALT = 1
{
&AU1ALT_I = 1
}
ELSE
{
&AU1ALT_I = 0
}
}

Var 2012, name AU1VH1MI_I, static
Var 2014, name AU1VH2MI_I, static
Var 2027, name AU1VH1VO_I, static
Var 2028, name AU1VH2VO_I, static
Var 2022, name AU1NA1VO_I, static
Var 2023, name AU1NA2VO_I, static
Var 2017, name AU1AD1VO_I, static
Var 2018, name AU1AD2VO_I, static
Var 2021, name AU1MKRVO_I, static
Var 2030, name AU1RTIC_I, static // ????, Value 1
Var 2001, name AU1FILT_I, static
Var 2002, name AU1ALT_I, static

Var 0807, name AU2VH1MI, Link IOCARD_OUT, Device 21, Output 9 // AUDIO2 VHF1 MIC
Var 0808, name AU2VH2MI, Link IOCARD_OUT, Device 21, Output 10 // AUDIO2 VHF2 MIC
Var 0809, name AU2VH1VO, Link IOCARD_OUT, Device 21, Output 11 // AUDIO2 VHF1 VOL
Var 0810, name AU2VH2VO, Link IOCARD_OUT, Device 21, Output 12 // AUDIO2 VHF2 VOL
Var 0811, name AU2NA1VO, Link IOCARD_OUT, Device 21, Output 13 // AUDIO2 NAV1 VOL
Var 0812, name AU2NA2VO, Link IOCARD_OUT, Device 21, Output 14 // AUDIO2 NAV2 VOL
Var 0813, name AU2AD1VO, Link IOCARD_OUT, Device 21, Output 15 // AUDIO2 ADF1 VOL
Var 0814, name AU2AD2VO, Link IOCARD_OUT, Device 21, Output 16 // AUDIO2 ADF2 VOL
Var 0815, name AU2MKRVO, Link IOCARD_OUT, Device 21, Output 17 // AUDIO2 MARKER VOL

Var 0816, name S_AU2VH1MI, Link IOCARD_SW, Device 21, Input 15 // AUDIO2 VHF1 MIC
{
IF &S_AU2VH1MI = 1
{
&AU2VH1MI_I = -1
}
ELSE
{
&AU2VH1MI_I = 0
}
}

Var 0817, name S_AU2VH2MI, Link IOCARD_SW, Device 21, Input 16 // AUDIO2 VHF2 MIC
{
IF &S_AU2VH2MI = 1
{
&AU2VH2MI_I = -1
}
ELSE
{
&AU2VH2MI_I = 0
}
}

Var 0818, name S_AU2VH1VO, Link IOCARD_SW, Device 21, Input 18 // AUDIO2 VHF1 VOL
{
IF &S_AU2VH1VO = 1
{
IF &AU2VH1VO = 0
{
&AU2VH1VO_I = -1
}
ELSE
{
&AU2VH1VO_I = 0
}
}
}

Var 0819, name S_AU2VH2VO, Link IOCARD_SW, Device 21, Input 19 // AUDIO2 VHF2 VOL
{
IF &S_AU2VH2VO = 1
{
IF &AU2VH2VO = 0
{
&AU2VH2VO_I = 1
}
ELSE
{
&AU2VH2VO_I = 0
}
}
}

Var 0820, name S_AU2NA1VO, Link IOCARD_SW, Device 21, Input 20 // AUDIO2 NAV1 VOL
{
IF &S_AU2NA1VO = 1
{
IF &AU2NA1VO = 0
{
&AU2NA1VO_I = 1
}
ELSE
{
&AU2NA1VO_I = 0
}
}
}

Var 0821, name S_AU2NA2VO, Link IOCARD_SW, Device 21, Input 21 // AUDIO2 NAV2 VOL
{
IF &S_AU2NA2VO = 1
{
IF &AU2NA2VO = 0
{
&AU2NA2VO_I = 1
}
ELSE
{
&AU2NA2VO_I = 0
}
}
}

Var 0822, name S_AU2AD1VO, Link IOCARD_SW, Device 21, Input 22 // AUDIO2 ADF1 VOL
{
IF &S_AU2AD1VO = 1
{
IF &AU2AD1VO = 0
{
&AU2AD1VO_I = 1
}
ELSE
{
&AU2AD1VO_I = 0
}
}
}

Var 0823, name S_AU2AD2VO, Link IOCARD_SW, Device 21, Input 23 // AUDIO2 ADF2 VOL
{
IF &S_AU2AD2VO = 1
{
IF &AU2AD2VO = 0
{
&AU2AD2VO_I = 1
}
ELSE
{
&AU2AD2VO_I = 0
}
}
}

Var 0824, name S_AU2MKRVO, Link IOCARD_SW, Device 21, Input 24 // AUDIO2 MARKER VOL
{
IF &S_AU2MKRVO = 1
{
IF &AU2MKRVO = 0
{
&AU2MKRVO_I = 1
}
ELSE
{
&AU2MKRVO_I = 0
}
}
}

Var 0825, name S_AU2RT, Link IOCARD_SW, Device 21, Input 28 // AUDIO2 R-T
{
IF &S_AU2RT = 1
{
&AU2RTIC_I = 0
}
ELSE
{
&AU2RTIC_I = 1
}
}

Var 0826, name S_AU2IC, Link IOCARD_SW, Device 21, Input 29 // AUDIO2 I-C
{
IF &S_AU2IC = 1
{
&AU2RTIC_I = 2
}
ELSE
{
&AU2RTIC_I = 1
}
}

Var 0827, name R_AU2FILTV, Link IOCARD_SW, Device 21, Input 27 // AUDIO2 FILTER V ROTARY
{
IF &R_AU2FILTV = 1
{
&AU2FILT_I = 1
}
ELSE
{
&AU2FILT_I = 0
}
}

Var 0828, name R_AU2FILTR, Link IOCARD_SW, Device 21, Input 25 // AUDIO2 FILTER R ROTARY
{
IF &R_AU2FILTR = 1
{
&AU2FILT_I = 2
}
ELSE
{
&AU2FILT_I = 0
}
}

Var 0829, name S_AU2ALT, Link IOCARD_SW, Device 21, Input 30 // AUDIO2 ALT-NORM
{
IF &S_AU2ALT = 1
{
&AU2ALT_I = 1
}
ELSE
{
&AU2ALT_I = 0
}
}

Var 2034, name AU2VH1MI_I, static
Var 2044, name AU2VH2MI_I, static
Var 2057, name AU2VH1VO_I, static
Var 2058, name AU2VH2VO_I, static
Var 2052, name AU2NA1VO_I, static
Var 2053, name AU2NA2VO_I, static
Var 2047, name AU2AD1VO_I, static
Var 2048, name AU2AD2VO_I, static
Var 2051, name AU2MKRVO_I, static
Var 2060, name AU2RTIC_I, static
Var 2033, name AU2FILT_I, static
Var 2031, name AU2ALT_I, static



Best regards

Urs

[mvr1918]

Urs ir right.

There is no Audio script part in the script you are using.

The OCP4NGX_V4.0_OC.ssi has the correct script code for both AUDIOs when they are integrated in the Opencockpits PEDESTAL P&P.

As you are using the standalone AUDIO set that has only 1 USB for both panels, they should work using Urs script modification.

As Opencockpits has many options, there is no way I can make every options as P&P. Some modifications are then needed.


Using the new OC4BAv4 ease the modification editing.

If you understand how to use IDX, DEVICE nbr etc. in the script , modifications is quite simple.

[veelo]

Roark,Urs,

Thank you for your help so far, but....
I do not have the foggiest idea how to insert the piece of script Urs has send me.
So please be my guest and help me through Teamviewer??

Pieter

[veelo]

Hi Roark, Urs,

Got it going works on first sight. Will keep you posted. Once more thanks a million

Pieter

[mvr1918]

Here is a short video on how to do it.

https://youtu.be/ySizG1jlSrA

You also have then to make a new configuration file with OC4BAv4/Config that uses the new OCP4NGX_PP_v4.0_Audios.ssi