Cant select Autobrakes to RTO "Fixed"(SOLVED)

[gblair]

Hi All,

Firstly big thank you to Roar, I am loving using your software to set up my cockpit and PMDG 737NG.

I have a mix of P&P modules: EFIS, MCP, Com, Nav and ATC as well as master card and USB extension connected to OC MIP connection board which is connected to the Captains AFDS all working correctly.

I have now just added the OC "MIP central panel BKI IDC" connected to the MIP card. Everything is working except the autobrakes switch in the RTO position.

I can turn through Off, 1, 2, 3 Max Ok but when I turn to RTO, nothing !!!

If I check in the PMDG cockpit I can see the switch turning as I turn the knob, but not to RTO. I can select the RTO position in the PMDG cockpit.

I have checked in the SIOC IOCP Console and the switch is detected in RTO and the other positions so it seems to be an OC4BA problem?? I am using the OCP4NGX_PP_v2.0.ssi script

I have checked and have all the latest versions of SIOC and OC4BA.

Anyone have similar problem or ideas ?

[mvr1918]

Have you tried the OCP4NGX_PP_MIP_V1.2.ssi script to see if it works better?

It works OK with all my scripts in my Cockpit.


You can send a log text from Iocpconsole, so I can look

[gblair]

I was traveling at the time I made my post and couldn't check the script I was using !!!

I have actually been using OCP4NGX_PP_MIP_V1.1.ssi

Where can I get the OCP4NGX_PP_MIP_V1.2.ssi version ?

Many thanks

[gblair]

with the OCP4NGX_PP_MIP_V1.1.ssi script, this is the log from iocpconsole when switching from off up to Max and then down to RTO

350=0 - AUTOBRAKE_RTO
351=0 - AUTOBRAKE_OFF
352=1 - AUTOBRAKE_1
2557=2 - AUTOBRAKE_SEL
352=0 - AUTOBRAKE_1
353=1 - AUTOBRAKE_2
2557=3 - AUTOBRAKE_SEL
353=0 - AUTOBRAKE_2
354=1 - AUTOBRAKE_3
2557=4 - AUTOBRAKE_SEL
354=0 - AUTOBRAKE_3
353=1 - AUTOBRAKE_2
2557=3 - AUTOBRAKE_SEL
353=0 - AUTOBRAKE_2
352=1 - AUTOBRAKE_1
2557=2 - AUTOBRAKE_SEL
352=0 - AUTOBRAKE_1
350=1 - AUTOBRAKE_RTO
2557=0 - AUTOBRAKE_SEL
351=1 - AUTOBRAKE_OFF
2557=1 - AUTOBRAKE_SEL
350=0 - AUTOBRAKE_RTO
351=0 - AUTOBRAKE_OFF
350=1 - AUTOBRAKE_RTO
2557=0 - AUTOBRAKE_SEL
351=1 - AUTOBRAKE_OFF
2557=1 - AUTOBRAKE_SE

[gblair]

Sorted !!!

Was nothing to do with the script, I had a bad connection on the cable to the Rotary switch.

Thanks Roar for the help

[mvr1918]

Marked this as SOLVED