www.flightsim4fun.com - rksoftware

Thanks for the reply. I do not checked if the variables I was looking for are in the Display section probbably I did this in the P3D version and do not remember. What I did for now is use the old script I used to use in P3D and all things worked as expected. I will use this script till next version....

Hello Roar, Hope you doing well. I have one custom OVH-FWD so I needed to edit the scrip for P3Dv5 and now I am flying MSFS2020 and need to modify again. I bought the Oi4FS and the 737 driver and when I try to edit the script some strange things happen: 1. When I filter for OVH-FWD and Outputs I don...

You can't send 500 or 0 to the var as it would not help anything. You should not modify anything in the code but the input/output numbers. How many times must I tell you that you should change the input/output numbers so they match your hardware? This is my last response as you seem not to do as to...

It could also be an issue with the wiring of the digits, you have to check. If you understand the script it is easy to do any modification to fit your hardware wirings. I understand just the basics. for example, I do not know how to solve this problem modifying the script without re-wire the encode...

A rotary knob uses 2 successive inputs. Using the default script means that the rotary needs to be connected to inputs 126 and 127. Turning the knob to the right will set 126=1 127=0, then 126=1 127=1, then 126=0 127=1, then 126=0 127=0 and so on. In your case use your script should be modified to ...

I play around with the var 0105 values and discovered something: when IF and ELSE have the same values of 16384 the encoder works perfectly. add 500 continually each clockwise turn. the same is for value 8192. subtract 500 continually each counter clockwise turn. So I tried to create one var for inp...

As you are building your own system based on Opencockpits IOCARDS, you MUST learn SIOC and SIOC scripting, at least know how to change device and input/output numbers in the script to fit your hardware. There are many examples given in the www.flightsim4fun.com forum and website on how to do this. ...

temp_rectL and temp_rectR are connected to the L and R retractable switches for the landing lights. You need to understand what the script parts for FLT ALT and LAND ALT do and make necessary modifications to fit your hardware wiring. I cant figure out how to make FLT and LAND ALT work... I don't k...

to find out the wiring in your modules use the SIOC monitor. there you can see which inputs are activated when you press a button. do this for all inputs and write that down and use it to modify the script. do the same for outputs hello MVR1918, thank you for the reply. All good for the Displays no...

Thx for the reply. I still having some troubles: To solve all your problems you need to understand SIOC and modify the script to fit your specific hardware wirings. 1. Odd behavior when I push the R Probe Heat switch There will be issues if you have not wired all inputs in your own built OVH. See ht...