www.flightsim4fun.com - rksoftware

Hi Roar, samething strange : I set the hdg, vertical speed and than the autopilot. I disconnect just the hdg with the vertical speed and autopilot still on The autopilot force the plane to go back to the old hdg even if i manually try to change it. I use a default cesna plane. Anyone else having the...

Thanks fo the moment. i do not think my h/w is faulty since it works in P3D.
I will wait what happens with the next release (now i have the 1.9.0

Ciao
Claudio

Hi Rosr, i apologize as far as the frequency change from stad-by to active, yoy are right and it works. As far as vertical speed i attach the screen shoot you suggested corresponding to the sequence i did : initial situation : display is 100 move the wheel of one step up display is still 100 press v...

Hi Roar, as you asked, i report all the problems i enconter. Setting a stand-by frequency and then press the TFR button on the radio. The radio transfers the stand-by to active but the frequency does not become active in the plane (172, 208B, CJ4) unless i press on the screen the <--> button of the ...

Hi Roar,

FS2020 Version 1.9.3.0
OiMS Version 1.4

Same problem on 172 + 208B, CJ4

Is there any log (where ?) that can help you ?

Thanks in advance

Claudio Damiani

Hi, loaded the 1.4 and HDG is working There is still something wrong in my situation with the vertical speed. The display is just sometimes updated with the right indication (with a delay of seconds) and some times it stays with the previous value. To get the right indication on the display i have t...

Hi, 1.4 loaded and the HDG is OK. I have small problem with the vertical speed. Moving the whell the display is not always updated to right value and some times is even not updated. To have the right display i have to disangage and engage again the V/S button. Do you have the same ? Claudio Damiani

Hi, just an addendum to my previus notes. Concerning the vertical speed i have the following for example : 1) vertivcal speed display 600 and V/S led on 2) Move the v/s whell 3)nothing happens 4) Press v/s 5) V/s led off 6 Vertical speed display ---- 7) Press v/s 8) v/s led on 9) Vertical speed disp...

Hi all, just to summerizing the sequence : 1) Start OiMS (all display on except IAS/MACH and vertical speed ----) 2) Start FS2020 3) select the aircraft (in my case 172 Garmin 1000 4) Start OiMS again Is this right ? During the flight i have : 1) Set the altimeter 2) Set the vertical speed (here the...

Hi Roar,

do you plav to have an MCP/Radios working for Standard FS2020 aircrafts with digital panel ?
Thanks

Claudio Damiani