www.flightsim4fun.com - rksoftware

It is a bug in the OCP4NGX_V4.4.ssi script that came with OC4BAv4 beta1. A new updated OC4BAv4 beta2 download is sent to you for test. You're the best! I'm using a modified OCP4NGXv4.4.ssi file with the correct servo values for my hardware and it works great with the 737, thanks! Now I just need th...

Last update before I go to sleep, I tried an older 4.2 ssi file and it worked! I changed the values to match the various flap positions and it worked great. Is it possible that the OCP4NGX_v4.4.ssi is corrupted on my end?

Thanks,

George

How about these entries? Do I need to modify them? Thanks again! Var 1328, name FlapPosL, static // Flaps needle left 0 to 40000 { CALL &FlapsDisplayL } Var 0429, name FlapsDisplayL, Link SUBRUTINE { C0 = &AUDI3_POWER_ON = 0 C1 = &FlapPosL < 10 IF C0 OR C1 { CALL &AllOffL } ELSE { I...

Update: I read through the Opencockpits PDF for the flap gauge and modified a new the script based on v4.4 to the following. At least the Flap indicator goes to UP when I start OC4BAv4, but there's no movement as the flaps extend or retract: Var 0331, name servo_flaps, Link USB_SERVOS, Device 36, O...

The Flap servo should be connected to Output 1 of The Servo Card. Connect Servo Card USB to PC. Start OC4BAv4. Click Config Click PMDG B737 Click OCP4NGX_v4.4.ssi Now all P&P modules should be listed in the Cockpit configuration box Click detected Servo Card in Modules box Click MIP_ServoCard1 ...

Hi all, I received an Opencockpits USB servo card today. I hooked it all up and with SOIC monitor I was able to move the flap indicator, but I'm lost on how to set it up with OC4BAv4. Could someone please help me setup the flap gauge? By the way, I'm using the OCP4NGX version 4.4.0.0 and OCP4NGX_v4....

Hi,

It's for a flap gauge with a servo. I'll order the opencockpits USB servo controller. How do you setup the flap gauge to sync up with your software?

Thanks again,

George

Hi Roar, Would OC4BAv4 work with a Pololu Micro Maestro 6-Channel USB Servo Controller? I know you said that the Opencockpits version would work, but it's easier for me to buy the Pololu controller. By the way, do you have a tutorial on how to use OC4BAv4 with a USB servo controller? Thanks for the ...

PMDG 747 for P3D V4 is available! Installing right now. Can't wait for updated P3D V4 OCP4747X drivers, thanks!

George

Hi Roar,

When I press the CLR button on the CDU, about 50% of the time OCP4NGX crashes. Usually just running OCP4NGX again allows me to continue as long as I avoid using the CLR CDU button. Any fix or beta out that I can try that would fix this?

Thanks,

George